White Magic Rebel - Need help! | TruckMount Forums #1 Carpet Cleaning Forums

White Magic Rebel - Need help!

SColeman

New Member
Jun 13, 2018
1
0
1
Real Name
Susan Coleman
I purchased a used White Magic Rebel...not sure of age...but it was a great deal and couldn't pass it up!
After getting it home and going through it, we ran into a problem...
Whoever had it before us obviously decided that they needed to re-run the lines to the unloader and to the chemical feed knob.
So here is my problem: However they ran the lines the only why I can adjust the pressure is with the chemical adjust knob (on,off,prime). I either have off, 500psi or 3000psi.
I hope someone can tell me how the lines should be ran to/from the unloader and to/from chemical knob. I can't find a diagram to save my life! The closest repair shop is 2+ hours away, and I can't do without work van.
I also tried to do a drawing of how it is ran, but it just looks like a bad football play!
Any help is much appreciated!
 

rob allen

Administrator
Staff member
Administrator
Sep 5, 2007
35,277
17,809
113
Va.
www.drynclean.com
Real Name
Robert Allen,Jr.
Business Location
United States
Tough one. Why not just add a 2nd unloader to your solution reel?
 

sbsscn

Well-Known Member
Sep 17, 2009
2,260
729
113
california
Real Name
Arm Ben
Business Location
United States
the unloader should have a input (high pressure) coming in from pump
a line coming from outlet (controlled) to the female quick connect
and one outlet going into the water box