What wand is this?

[Jimmy Hitt]

Not even sure if the pic posted. 2" quad jet low profile head. Think its the same one as @WillnDeb

Sent from my Z992 using TMF Forums mobile app

 

[Jimmy Hitt]

 

[Jimmy Hitt]

What wand is this????

 

[suncarpet]

Not sure. Good question . I have 1 as well and was wondering. It came with the van.

Works pretty good
Rob Mueller, aka Mr. Sun

 

[Jimmy Hitt]

Ours are little different Rob but maybe one of these wand experts will inform us. It's my first 2" wand, 15 years and only had 1.5" everywhere I worked. The jets are a little streaky, im assuming since they're so much lower. Didn't know if a glide would help this or different tips. It has SS9501's in I t. Any help/advice/tips for this wand would be greatly appreciated. @john gerding you're the jet expert, what should I run in ths?

 

[WillnDeb]

I have one in 2 inch that's all steel ,,,,heavy as heck

 

[Jimmy Hitt]

 

[suncarpet]

View attachment 28727

Slightly different on the top yes the underneath side with the Jets and the way that it set up is exactly the same


Rob Mueller, aka Mr. Sun

 

[Jimmy Hitt]

And the best T&G brushes in the world in the background. Thanks a lot
@aloha one

 

[Jimmy Hitt]

Slightly different on the top yes the underneath side with the Jets and the way that it set up is exactly the same


Rob Mueller, aka Mr. Sun

What tips do you have Rob? Any streaking? Glide?

 

[Jimmy Hitt]

I have one in 2 inch that's all steel ,,,,heavy as heck

Yea it was hell on 3500sqft of CGD. Thankfully it wasn't hopping, but by the end I was beat. Dry time was super fast tho compared to my 1.5"

 

[WillnDeb]

Yea it was hell on 3500sqft of CGD. Thankfully it wasn't hopping, but by the end I was beat. Dry time was super fast tho compared to my 1.5"

The vikings coulda used those things as weapons,,,,

 

[Jimmy Hitt]

Too bad 'm not the size of a Viking or Frank, guess I need to pull the trigger on a glide

 

[suncarpet]

A glide would only help. mines a son of a gun to Push to.


Rob Mueller, aka Mr. Sun

 

[suncarpet]

No streaking problems though. what PSI are you running at? I run mine around mine in between 350 and 400


Rob Mueller, aka Mr. Sun

 

[Jimmy Hitt]

Same 350-400. Only on a good plush nylon do I see streaks. Didn't know if should step up to 02's. What jets do you have?

Sent from my Z992 using TMF Forums mobile app

 

[WillnDeb]

I run 110's in mine and angle the outside jets back a little

 

[Mojo Rising]

That is a wespac wand.. good wand but it's one if the heaviest wands on the market at 11 lbs.

Sent from my HTC6435LVW using TMF Forums mobile app

 

[Mojo Rising]

I used 95015 jets on mine..

Sent from my HTC6435LVW using TMF Forums mobile app

 

[Jimmy Hitt]

My wand or robs? Thanks mojo

Sent from my Z992 using TMF Forums mobile app