Recoil XPS and Little Giant heater and/or Bane-Clene tanks ad reels

Lefty724

Well-Known Member
Oct 21, 2008
4,604
856
113
Salad Bowl, Cali
Real Name
E
Business Location
United States
Well guys...it's time for me to sell my Recoil XPS. I am selling the Recoil XPS which has roughly 75 hours on it, the 2 jet 1 1/2" wand, and upholstery tool. The Recoil is in 100% perfect condition! I am also throwing in a Little Giant 2ht (with cart and connections) propane heater in the deal. The heater has the same amount of hours as the Recoil, and has a dent in the side of it that happened during shipping from Steambrite. The dent in the heater does not affect performance at all. This will not come with hoses or solution line unless you want some really old orange vacuum and solution hoses that I have had laying around, it will come with a couple of whip solution lines that attach the Recoil to the heater.

I love this machine and have nothing but respect for Ed and Cross-American (search my posts)! I am selling this machine because it has served it's purpose for me as a stepping stone to get my business started and into a eventually into a TM, and I'm hoping it can do the same for someone else. The Recoil has been a wonderful machine and has never given me any problems and has helped me grow my business. I know I will regret this decision later on, just seems like the right thing to do at this point in my business.


I am also selling my Bane-Clene tanks with 3 reels, 110 gallon waste tank, and 70 gallon fresh tank. The tank are in fair condition and I am asking $500 for the tank, pick up only. If you buy the Recoil and are local, I will give you the tanks for $250!!!
PM me or post here if you have any questions or you can call me and (831)262-0900, thanks

I am asking $2850 or an even $3100 for Recoil, heater and tanks.... and am willing to drive 4-5 hours in either direction from Salinas, Ca, or buyer to pay for crating and shipping. I will get pics up later after I figure out how!! chill RC LOL!!!
 

Lefty724

Well-Known Member
Oct 21, 2008
4,604
856
113
Salad Bowl, Cali
Real Name
E
Business Location
United States
Here are a few pics that I have attached:
Here are the Bane tanks which are 70 gal fresh and 110 gal waste, along with 3 reels for extension cord, solution line and vacuum hose.

Here is a shot of the Recoil 3XPS

Here is a shot of the Little Giant 2ht, tank and cart

Last, a shot of all three and where the dent on the heater is. This was shipped to me like this and I fought SteamBrite over it and nothing!!
 

CCWorks

Premium VIP
Jan 3, 2010
10,778
1,341
113
Michigan
Real Name
Greg
Business Location
United States
With shipping and paypal you will have me as a buyer. Little Giant 2ht and XPS only, no other items... well maybe you can include the hoses
Send a PM if interested
 

Lefty724

Well-Known Member
Oct 21, 2008
4,604
856
113
Salad Bowl, Cali
Real Name
E
Business Location
United States
With shipping and paypal you will have me as a buyer. Little Giant 2ht and XPS only, no other items... well maybe you can include the hoses
Send a PM if interested
Shipping and Paypal? You can send ME a PM and I will get back to you asap. Not sure what you mean?
 

CCWorks

Premium VIP
Jan 3, 2010
10,778
1,341
113
Michigan
Real Name
Greg
Business Location
United States
I sent a PM but not sure it went though ( I dont see any sent PMs in my sent box)
 

tcornine

New Member
Feb 5, 2010
7
0
0
pa
Real Name
thomas cornine
Business Location
United States
just wondering if you still have the bane clene tanks ?
 

Ed Valentine

Well-Known Member
Oct 8, 2008
1,728
595
113
Michigan, USA
cross-american.com
Real Name
Ed Valentine
Business Location
United States
Edgar;

I heard that you recently may have sold your RECOIL-XPS system? Gee's, if true, that was fast!You have always helped others in our Industry and are a real Pro.

The very best always;
Ed Valentine
 

Lefty724

Well-Known Member
Oct 21, 2008
4,604
856
113
Salad Bowl, Cali
Real Name
E
Business Location
United States
Thanks Ed! The Recoil has allowed me to grow beyond my expectations. I have nothing but good things to say about the Recoil XPS and CA, just time for me to move on to a new TM and van. I know I will kick myself in the a$$ next time I need a porty, maybe by then Locko will be producing his own! LoL




Sent from my iPhone using Tapatalk
 

Lefty724

Well-Known Member
Oct 21, 2008
4,604
856
113
Salad Bowl, Cali
Real Name
E
Business Location
United States
E, You might be one of the first to try it.
Still on testing, one more time thanks again to Rob for letting me use his anemometer or cfm meter.
I am also testing some wands.
Let me know Locko, I would suggest to build it as compact as possible. I am really liking the CFX platform, just do not like the whole "pump" issue.
 

Ed Valentine

Well-Known Member
Oct 8, 2008
1,728
595
113
Michigan, USA
cross-american.com
Real Name
Ed Valentine
Business Location
United States
Jaime;

We can sell the housing however, because it costs more than a cup of java!

E; BOTH you and Mr. Jaime are terrific individuals in our Industry with great personalities to boot! I am very glad that you loved that Industrial RECOIL.

very best to the both of ;
Ed Valentine
 

locko-fabara

TMF Portable & VCT Specialist
Jul 14, 2008
4,880
278
83
42
Norwalk
www.x-cleaning-services.com
Real Name
Jaime Fabara
i was thinking the same thing E, no pump just direct from the faucet, 2 cords of 20 amps each one can get you 4 motors with 130 cfm each one, so on paper can be 520 cfm, with 2.5 inches port inlet. tank top mounted motors.
 

CCWorks

Premium VIP
Jan 3, 2010
10,778
1,341
113
Michigan
Real Name
Greg
Business Location
United States
I would install 2 pumps. One high psi solution and one auto pump out. Tap water is low pressure in some homes. I guess if you have a high flow nipple on wand, you can get enough solution.
 

Lefty724

Well-Known Member
Oct 21, 2008
4,604
856
113
Salad Bowl, Cali
Real Name
E
Business Location
United States
CCWorks said:
I would install 2 pumps. One high psi solution and one auto pump out. Tap water is low pressure in some homes. I guess if you have a high flow nipple on wand, you can get enough solution.
Good idea CC. If I was building it, I would do just an auto pump out and run an auxilary pump like a water otter or shockwave for an adjustable psi. That way you can do carpet and tile.


Sent from my iPhone using Tapatalk
 

Ed Valentine

Well-Known Member
Oct 8, 2008
1,728
595
113
Michigan, USA
cross-american.com
Real Name
Ed Valentine
Business Location
United States
CONGRADULATIONS, E !!!!!!!

That RECOIL-XPS sure didn't last very long! And, I understand it is going to another nice home.

Very best to all;
Ed Valentine
"Smart-design" Components
 

Lefty724

Well-Known Member
Oct 21, 2008
4,604
856
113
Salad Bowl, Cali
Real Name
E
Business Location
United States
Ed Valentine said:
CONGRADULATIONS, E !!!!!!!

That RECOIL-XPS sure didn't last very long! And, I understand it is going to another nice home.

Very best to all;
Ed Valentine
"Smart-design" Components
Yes it did Ed. I will be calling you later to discuss a couple of ideas that I have.

Sent from my iPhone using Tapatalk
 

Latest posts