Jets

[Jeff Marek]

Looking for suggestions on size jets to use and configuration.
Thinking about 11001”s on the outside, and 11002”s on the inside.
I have a 4 jet titanium Westpak
TIA

 

[Jim Davisson]

What type of machine are you using and typical hose lengths? I recommend 95° jets outside and 110° jets inside.

 

[Jim Davisson]

You can fit check valves on those jets inside those manifolds without screens and you will clean deeper into the carpet without the glide on any wand.

 

[Jeff Marek]

What type of machine are you using and typical hose lengths? I recommend 95° jets outside and 110° jets inside.

TCS Chief, avg hose length 125’

 

[Jeff Marek]

You can fit check valves on those jets inside those manifolds without screens and you will clean deeper into the carpet without the glide on any wand.

IMO glides are a game changer.

 

[Jim Davisson]

12-14 flow easy with your machine, you are drying quicker with the glides no doubt. However, if you do the math you are choking your machine for surface area at the carpet interface with the glide.

You could easily run 9503's on the outside and 11004's on the inside jets.

 

[Jim Davisson]

Glides are a false economy.

 

[ACP]

are you running a #3 little giant with your chief?

 

[Ken Raddon]

I ran 5 03s on my last tm and have a glide and get great dry times and would never go back to the insanity that was/is an unglided wand.

 

[Jeff Marek]

are you running a #3 little giant with your chief?

Yes sir.

 

[Kevin Dumas]

Do not run 01 jets as you will spend most of the time unplugging them.

 

[Joe cool]

My Ti wand has 11001 with screen filters built in .
One soap by bridgepoint clogged them up in less then 1- 6lb jug .
Prochem never clogs them with buckets driven thru them .