EZ truck mount engine replacement

[Odin]

well the old Subaru grenade yesterday over 1900 hours on a single-cylinder air cool 13.5 hp with a 33 blower is not bad

369 dollar harbor freight with 80 dollars for the two-year warranty

total hours 30 minutes to remove the motor

1 hour drive time to harbor freight and home

took an hour and a half to remove the pulleys from the Subaru
engine installed 30 minutes can't believe everything fits exactly in the old holes.

Tomorrow put on pulleys fill with oil and gas new belts and give it a whirl

I don't know of any truck mount that can be fixed this EZ

 

[LeeRoy]

That's awesome!!

 

[Rugsucker1985]

This is amazing, is this the predator engine?

 

[damien712]

I have an EZ2036 truckmount that had not been started in 2 years(long story). Anyway had to replace battery and regulator unloader. Hooked up water and an upholstery tool and it started it up. Ran poorly for a few minutes before the engine smoothed out. It was an EZ fix!

 

[Rick F]

I have an EZ2036 truckmount that had not been started in 2 years(long story). Anyway had to replace battery and regulator unloader. Hooked up water and an upholstery tool and it started it up. Ran poorly for a few minutes before the engine smoothed out. It was an EZ fix!

My ez 2545 is running like a champ also!

 

[Ed Cruz]

My ez 2545 is running like a champ also!

My 35/47 has been running like a top for a couple years.........had to remove and replace all the cheap hoses and fittings.

 

[Rick F]

My 35/47 has been running like a top for a couple years.........had to remove and replace all the cheap hoses and fittings.

Same here replaced all the hose and coupler 2 times!