Cleaning Gym Rubber Mat?

[Johnny Bravo]

My spinner clamped down too much. Went with a wand.

My spinner did as well so I just opened up the relief valve on it.

 

[Mike Krall]

My spinner clamped down too much. Went with a wand.

How did it come out? Did you use what Rob said?

 

[elementcarpet]

No peroxide. Cimex with TMF encap and blow them away!


Sent from my iPhone using TMF Forums

Rob, is your encap sold at interlink or can I order it from your store? I don't remember seeing it last time.

 

[rob allen]

Rob, is your encap sold at interlink or can I order it from your store? I don't remember seeing it last time.

It's in the TMF store.
http://cleaningsupplies.mybigcommerce.com/encap-pro-1-gallon/

Sent from my iPhone using TMF Forums

 

[hurricanecc]

You're saying I can clean this with encap and my cimex?

 

[rob allen]

View attachment 64425

You're saying I can clean this with encap and my cimex?

I prefer an Orbot w/pad and follow bonnet. Do a sample. Cant hurt.

 

[hurricanecc]

Ok, I'll try a few things out

 

[Prosteam-sonomacounty]

View attachment 64425

You're saying I can clean this with encap and my cimex?

Remember the makeup of soil in each situation...
Here, you have salt (sweat) body oil and whatever alkali has built up from maintenence cleaning.
Yer strategy shoukd be oil remover and acid...
Id probably attack this in two cleanings. One right after the other...
Id shower feed a citrus mix through a 175 on a soft nyon brush,..then rinse with the biggest sx you have.. Careful about slopping too much near cracks.

Then hydroforce some UPT , scrub w/175 again and rinse with clear...
Use a few airmovers...

Yer issue going forward is mostly the alkali salts.
You dont rinse those off well and itll look starchy when it dries

 

[Joe cool]

A micro blue bonnet looks like it would work if it don't catch a corner .

 

[EverythingFlooring]

I'd try "ice it" and some "Wiwax" do they still make that stuff? The Wiwax always worked...but the ice it was questionable...

 

[First Impressions]

Gym floor cleaner and degreaser and sealer

Sent from my SM-G920V using TMF Forums mobile app

 

[First Impressions]

http://www.rubberflooringinc.com/accessories/rubber-floor-finish-and-sealer.html

Sent from my SM-G920V using TMF Forums mobile app

 

[hurricanecc]

The flooring that's all one piece with specks in it, clean up a lot easier than these square mats. I tested stuff today, scrubbing with a cimex/encap and then carpet pre spray/cimex with brushes and extracted with a glide wand. The sx12 was tuff to move, but may have to be the choice, to avoid the lines I left when it dried. Past the fan was untouched, so there's a vast difference and the owner was happy, but I'm not.

 

[hurricanecc]

I'm getting the 360xL delivered tomorrow with the carpet and tile brush heads. Maybe with that and my 870ss, I'll make a dent on the mats.

 

[Mike Krall]

I'd try "ice it" and some "Wiwax" do they still make that stuff? The Wiwax always worked...but the ice it was questionable...

Yup they still make it.