Carpet brush clutch plate needed, cant find one. | TruckMount Forums #1 Carpet Cleaning Forums

Carpet brush clutch plate needed, cant find one.

Bexiesbruv

Premium VIP
Oct 24, 2013
1,291
416
83
60
Real Name
Stephen Beckwith
I just bought a couple of 16 inch 175's used. Each comes with a pad driver for hard surface and a carpet brush.
One of the brush drivers has no clutch plate and the other is split so only a matter of time before its of no use.
Problem is they are inset into 3.75 inch dia holes and the smallest I can find is 4 inch or 3.38 inches.
So the questions are
1. Do I buy the larger one and ream out the hole with a router
2. Do I buy the smaller and hope there is enough material to locate the screws to attach it
2. Do any of you folks know where I can get one.

There is no manufacturer name on either of the machines.
 

Dewitt

Well-Known Member
Dec 22, 2010
1,642
235
63
37
Illinois
Real Name
Dewitt
Business Location
United States
I would recommend JonDon, they went above and beyond to find the right clutch plate for my 175 a few months ago. It was a rare size and fit, but they found one that worked for me.
 

Bexiesbruv

Premium VIP
Oct 24, 2013
1,291
416
83
60
Real Name
Stephen Beckwith
I found a sales rep locally that I can send pics to and he is going to source one for me and have my local janitorial supplier bring it in.
Or I might just pull the one from a spare drive plate I have and ream out the hole to make it fit.