Blueline thermalwave 2 water coming out exhaust | TruckMount Forums #1 Carpet Cleaning Forums

Blueline thermalwave 2 water coming out exhaust

stearnsclean

Member
Jan 7, 2009
97
4
8
New hampshire
www.StearnsCarpetCleaning.com
Real Name
Dave Levesque
Just purchased this blueline thermal wave 2. I believe it was frozen
This elbow came from pump into heat exchanger. I replace elbow now water is coming out exhaust.
If I turn the valve that cools the water all the way left water stops coming out exhaust.
Could the exchanger in exhaust be frozen?20150827_215122.jpg 20150828_205606.jpg
Could that valve that mixes in cold water be malfunctioning?
 

Attachments

mrg.mrg.

Active Member
Oct 15, 2014
572
85
28
34
Real Name
zamir mejia
It's probably small crack so with little pressure it doesn't leak
 

mrg.mrg.

Active Member
Oct 15, 2014
572
85
28
34
Real Name
zamir mejia
I haven't used one of those. Usually you just take hoses off....unbolt it and it slides out
 

mrg.mrg.

Active Member
Oct 15, 2014
572
85
28
34
Real Name
zamir mejia
Then you'll have to move that. Maybe not completely out but enough to have room. You can try and by pass the heat exchanger if you need to use truckmount. You'll just lose some heat
 

mrg.mrg.

Active Member
Oct 15, 2014
572
85
28
34
Real Name
zamir mejia
Cool. Check and see how much heat you get bypassed. Maybe you won't need it. Which engine does it have?