Before and After
- Thread starter John LaBarbera
- Start date
ECO14, microfiber pads, sample chemical I had. Awesome Encap from the Encap Store would have done better I think.
- Sep 4, 2011
- 22,446
- 14,328
- 113
- 48
- Real Name
- Todd Cottino
- Business Location
- United States
Look at the big round stain at the top of one and bottom of the other. It’s the same carpet just viewed from opposite ends.
That's the first thing I noticed was that big round stain on the top photo and bottom photo so clearly the picture was taken at opposite directions. What I would like to know is how old were all those grease stains on that carpet?
if it was a new piece of remnant carpet and u tossed a bunch of grease and dirt on it then it really doesnt take much to clean it out...
you would be surprised what a cold water portable with no chems would do in that situation.
or even just a wet rag by hand
you would be surprised what a cold water portable with no chems would do in that situation.
or even just a wet rag by hand
That’s one Nasty Carpet! Looking good, keep up the testing. I think it’s cool when companies share with the public.
Okay. That narrows it down to between 2 months and................................. Thanks.
- Sep 5, 2007
- 34,389
- 16,987
- 113
- Real Name
- Robert Allen,Jr.
- Business Location
- United States
Should of used TMF SuperCap.
https://shop.truckmountforums.com/products/supercap-encapsulation-cleaner
https://shop.truckmountforums.com/products/supercap-encapsulation-cleaner
Hi John how is the 13inch with the 1 hp motor . I like the smaller size and want to be able to lift it into my express van. I had a orbot but sold it and now looking at yours. jz.
