Amtex Equipment

[Will Reed]

I too also like Amtex's stack machines. Only reason why I didn't get one is a by chance deal I got on a refurbished machine Nick Nellos offered me with only 300 hours on it.

 

[Blacktiedetailing]

I do like the stack idea though. I carry lots of water but sure do like the space saver..

 

[Johnny Bravo]

I'm going to get myself an Amtex stack, 40/47 if /when they make one. That is my next TM.

amtexequipment do you make one of these?

 

[Blacktiedetailing]

40/47 dragon they do..

 

[Blacktiedetailing]

I asked Ben about a 40/56? now that would be kick azzzzz.

 

[Johnny Bravo]

40/47 dragon they do..

Jeff, Just so you know. I want a 40/47 because you have a 30/47

 

[rob allen]

Ben @amtexequipment what model was that called in the original post?

 

[Dave Mead]

Hitting 650 hours this week on the 30/47 stacked inferno. Thing kicks ass. It pays for itself VERY quickly if you try hard enough.

Read my post to Rob. Having trouble with our local,repair/supplier. Say he will not install am,Amtex.

 

[Dave Mead]

Ben @amtexequipment what model was that called in the original post?

Rob, did you read. My post to you?

 

[HANDYMANNY]

I WILL BE PURCHASING A TM AND WOULD APPRECIATE ANY CURRENT OPINIONS / REVIEWS ON AMTEX PROWLER 14. IS IS RELIABLE? EASY TO REPAIR? HOW'S THE WATER TEMP? SUCTION USING 150 OF HOSE?

 

[1ST CHOICE CLEANING]

I can't say how the Prowler is but my Inferno 500 has almost 200 hrs on is since the 2nd week of October and I am more than happy.

 

[Zarz]

I WILL BE PURCHASING A TM AND WOULD APPRECIATE ANY CURRENT OPINIONS / REVIEWS ON AMTEX PROWLER 14. IS IS RELIABLE? EASY TO REPAIR? HOW'S THE WATER TEMP? SUCTION USING 150 OF HOSE?

The repair work on them should be no problem as all the components are pretty accessable. Amtex will have an endless supply of all components. Pending whether it has one or two HX's will be a factor of yr heat concerns. Two HX's will be no probs to keep up for any carpet and Upholstery cleaning. As for the Vacuum, The cfms may be only 200 however I'm sure the lift is good at 16hg's. There's a lot of support for you with Amtex Equipement and Ben there will be able to answer all your questions. For 100ft you should have no problems as a base unit. At 150ft it may just be a matter of a few more dry passes.
Cheers.

 

[Kipp]

So far so good....

 

[Harry Mullett]

So far so good....

5, 4, 3, 2, 1. . . .

 

[vnmineo]

popcorn ready

 

[matt30577]

I WILL BE PURCHASING A TM AND WOULD APPRECIATE ANY CURRENT OPINIONS / REVIEWS ON AMTEX PROWLER 14. IS IS RELIABLE? EASY TO REPAIR? HOW'S THE WATER TEMP? SUCTION USING 150 OF HOSE?

I haven't heard any negative feedback on the prowler.

Just be certain that he puts stainless steel water lines/not galvanized fittings on the machine, and refuse the hypro water pump (upgrade to a General Pump on it)

 

[aloha one]

I haven't heard any negative feedback on the prowler.

Just be certain that he puts stainless steel water lines/not galvanized fittings on the machine, and refuse the hypro water pump (upgrade to a General Pump on it)

or a Cat 5

 

[vnmineo]

I've only seen hypros on amtex truckmounts .... I hated mine on my Chem-Tex.... I'd never get another truckmount with one I'd just pull it off and replace it...

 

[Wec]

Hypro pumps are fine its just how everything is installed stainless steel is best not always possible for all lines

Just make sure there is no hydraulic lines anywere

 

[Omar]

I haven't heard any negative feedback on the prowler.

Just be certain that he puts stainless steel water lines/not galvanized fittings on the machine, and refuse the hypro water pump (upgrade to a General Pump on it)

Which stainless steel waterlines? Got a link?