Selling my 2006 Ford E350 van equipped with Prochem Blazer GT truckmount. Van is loaded up, looks good , runs good V10 motor, and has been a pleasure to own as it has been trouble free. Miles are high at 200,075 but has been well maintained. First owner who was a customer and myself. Purchased...
Was working on my truck mount today, prochem blazer xl, and somehow had the pressure regulator too lose and it shot off and water flooded the entire floor. I picked up all the parts, spring, cap, both ends and the bullet and put it all back together. Filled the water box back up started the...
I have a carpet cleaning van I bought
I’m located in cocoa florida
For sale best offer takes it, hasn’t been used in a while but looks to be in good shape had a ton of wands and hoses tank and machine everything whole van goes with it or if you want to remove
PROCHEM EVEREST650 HP ( 1100 ) HRS AWESOME CONDITION
PROCHEM 12 VOLT HOSE REEL
PROCHEM HAND CRANK REEL LIVE
120 GALLON FRESH WATER TANK W/PLUMBING KIT
COMET HD APO SYSTEM
WATER SOFTNER SYSTEM
200 FT VACUUM HOSE
200 FT SOLUTION HOSE
EXHAUST HOSE KIT
Throttle body off of 2005 Prochem Everest EFI Nissan A15 Engine, only about 100-200 hours of run time on it, excellent condition. Not a reconditioned but brand new manufactured from zenith, message me for any other specific questions. $1200.00
2015 Chevy 2500 STD Express Van Truck Mount
With -Prochem Legend GT Truck Mount Mfr. Model # 9.840-033.0- 60 gallon - 550 hours
Delivers 1,200 PSI and 330 CFM Stainless steel heat exchanger resists freezing
B-series belts for longer life and improved stretch resistance
23 HP Kohler...
-Regularly Serviced ( Service logs available from InterLink Supplies in Lorton, VA)
-Low Hours (536 hrs.)
Truck mount - ProChem Legend-XL Carpet Steam Cleaning system with 100 Gallon waste tank & Optional 60 Gallon Belly fresh water tank included.
Mounted on 2003 GMC Savana cargo van (~122k...
I have 2 wands for sale. Both are Prochem stainless 4 jet in good working condition. 12" head, 1.5" vacuum. solution screens installed. just cleaned and polished.
$300 ea or $550 for both plus shipping.
Wand 1 pic 1-5
wand 2 pic 6-11
Hey guys wondering if anybody has experience with the prochem Everest EFI. Looking to maybe purchase one and was wondering if parts are hard to find for it? Has a Nissan motor and 3000 hours on the machine
So i've been hunting around for a good quality single wand truckmount for a few weeks now. I've broken my decision down to either the prochem or sapphire.
What are your thoughts on each unit? I have one of the sales guys based her in Australia who has been very helpful and given me...
Start or Expand your own Carpet Cleaning Business with a Professional Prochem Legend GT Truck Mount Unit
300 ft of both solution and vacuum hose
Unit has just over 2,000 hours and was operated by ONE owner.
The truck mount received regular maintenance including oil...
Start or Expand Your Own Carpet Cleaning Business With A Professional Prochem Legend GT Truck Mount Unit
Includes 300 ft of both solution and vacuum hose
Unit has just over 2,000 hours
The truck mount received regular maintenance including oil changes
2006 Ford E-350 Super Duty Diesel, and 2006 Prochem Peak being sold together.
Van has 109,000 miles and is original owned, never crashed or driven by an employee. Recently serviced.
Machine has 1700 hours, water cooled Kohler 25 hp engine. always maintained and serviced.
Comes with stainless...
I finally got to run my Legend for 3 hours last night, and it really impressed me!
But when I went out to the truck, it had blown water everywhere, because the float switch didn't shut it down.
How to troubleshoot this?
Is there a relay involved, or does it just ground out the engine thru the...
I just picked up an older Legend, mounted on a fresh water tank, and I'm looking for any help or suggestions from anyone familiar.
I did the install on my Panther, and this is similar, but bigger and more connections, including a fuel tap.
Any input is welcomed.
Well the time has come to finally retire the old bad boy. She served me well after a rough start when no one including the factory could fix him. I finally found a surgeon in Florida that got him up and running properly. So yes, we went through hell a few times but we pulled out of the fiery...