Search results

  1. brian3180

    Removing HX in 4.6

    My back up cds froze during the texas freeze in February. Is removing the HX from a 4.6 cds a big job? HX froze.
  2. brian3180

    What kind of tile is this?

    Looks like ceramic on the pic but customer says Saltillo. [be ATTACH=full]95275[/ATTACH]
  3. brian3180

    Dirty, Oily chemical shelves

    What products tend to leak out of their gallon jugs? It seems that some of my encap products somehow leak. This time around I didn't have any encap on the shelf and something else leaks out and makes a mess. How do you keep yours clean?
  4. brian3180

    Competitors responding to post on my FB page?????

    What do I do in this situation? The guys telling people that he can beat my price and for them to DM him. I have no interest in competing to be the lowest bidder. Should I post a response to him? thanks.
  5. brian3180

    Curly cord on 360i??

    How do you replace it? Thanks.
  6. brian3180

    Any Tips And Tricks Using Unchained?

    How often are you doing a subsurface extraction with unchained?
  7. brian3180

    What does this look like?

  8. brian3180

    TMF Sporicidin?

    Does this product labor have instructions for use in a fogger? @admin
  9. brian3180

    Automatic pump out maintenance.

    I got a brand new HM 4.8 w/ salsa two years ago. It came with an APO but I had not used it because I didn't want to have something else to maintain(that and I would forget I had it). Anyways, I've used it twice this past week and it saves a bunch of time. I think I will use it more often...
  10. brian3180

    What are companies using for covid-19 in buildings?

    Do you foresee universities, public schools and hospitals getting daily, weekly treatments to disarm the virus in their buildings?
  11. brian3180

    360i motor

    I just recently started using my 360i again. Pulled it out today and the head would just barley turn when I pulled the trigger. Does that mean the motor is fried?
  12. brian3180

    360i maintenance

    I need to put the cover seal gasket on the carpet cleaning head of the 360i. Any good tips/pointers before I try to stick it on? I feel like i only have one shot. If I hesitate then I may need to order another one. Thanks!
  13. brian3180

    Cleaning rust spots off tools

    This is the first time I noticed the rust spots on my spinner. I have them on my 360i as well. What’s a good way to get these off? Thanks.
  14. brian3180

    Mini Turbo Spinner speed rate?

    I just got a mini turbo spinner and it certainly doesn't spin as fast as a floor spinner. Is this normal? Seems like some resistance when I push the jet assembly. I had it set at 1000 psi and you cannot hear the spin like you do in the floor spinner.
  15. brian3180

    Which tool and chems for granite ct and tile shower ?

    I’m in the market for a mini turbo spinner or something comparable. I’m finally going to offer counter top cleaning and shower cleaning. What chems are good to have on hand for these jobs? How would you handle this particular one? Thanks for any advice.
  16. brian3180

    RPM's pointer not moving on 4.8 CDS

    All wires seem to be intact from what I can see. Thanks.
  17. brian3180

    How to unclog 01 jets?

    For my Bonzer. They are getting clogged some how. The filter that comes with it seems clean. Anyway, what is small enough to clean the jets? Thanks.
  18. brian3180

    Tackless strip and crumbling concrete subfloor?

    I'm wondering what other ways are there to attach tack strip to concrete that breaks up when you hammer down the nails. Masonry screws? Hammer drill? Liquid nails? Thanks for any feed back.
  19. brian3180

    Unsatisfactory upholstery job...

    I used prochem upholstery pre spray with very little luck. I then spayed with grand slam and grout master and it showed a little more improvement. Does this look as clean as it can get? I’m assuming theses chairs are like a nylon or poly. No tags.
  20. brian3180

    Unsatisfactory upholstery job...

    I used prochem upholstery pre spray with very little luck. I then spayed with grand slam and grout master and it showed a little more improvement. Does this look as clean as it can get? I’m assuming theses chairs are like a nylon or poly. No tags.
  21. brian3180

    How important is emptying out your waste tank?

    I sometimes forget and I dump it the next morning. I really didn't think much about it when I had a SS waste tank in my trailer but now I have an aluminum hydramaster waste tank in the van and I get reminded with the stink when I get in the van the next day. Is it bad to leave an aluminum...
  22. brian3180

    Stain returned at the end of the job!!

    So I laid a towel on the stain and placed a tote for weight and after five minutes the stain was transferring to the towel. I'm debating if I should spray some encap juice or flush out with the claw. She said its probably spilled coke but I can't believe how quickly the spot returned.
  23. brian3180

    How to disengage hot water/heat supply in 4.8 CDS w/Salsa?

    Is there a fuse or something of that sort that I can disconnect? Thanks.
  24. brian3180

    Wall to wall wool carpet?

    I show up and customer shows me four areas of wool carpet. He Asked that I use cold water. He’s afraid of seems coming apart from shrinkage. I have a 4.8 HM so I don’t think I have an off button on my machine. Can I clean as normal and put dans to speed dry?
  25. brian3180

    Calling customers you serviced from 2-3 years ago...and longer?

    I'm a terrible business owner. The first short years I was in business I would call customers from the previous year to ask about getting carpets cleaned again. To say the least, I have not done this in quite a while. Even with all the reading and threads on TMF about the importance of...