Search results

  1. marco8

    pressure regulator leaking

    So pressure regulator leaking and notice theres a broken whit split o ring broken. can anyone send me to where to get new rings for the plunger and what size? Jon don wants to give you o rings with a new plunger for the repair kit. not spending that much when i only need the split o rings...
  2. marco8

    fuel transfer problem from gas tank

    been goin strong for 12 years.
  3. marco8

    fuel transfer problem from gas tank

    Good to know thank you. i can hear the pump under van but no fuel
  4. marco8

    fuel transfer problem from gas tank

    my machine is sitting on a water belly tank so its not sitting on the floor of van, my next question would be if i was to go out and by a longer fuel line to hook yo to backside of fuel filter and straight into a 5 gal gas tank would the 20hp kohler fuel pump be able to pull fuel from 3-4ft...
  5. marco8

    fuel transfer problem from gas tank

    ya, i started with the fuel pump and filter on my checklist first disconnected the gas line after the fuel filter and it sucked gas right out of a cup and running fine. havent checked for kinked lines and boy that would make me happy if thats all it was. So sounds like the fuel pumps in these...
  6. marco8

    fuel transfer problem from gas tank

    fuel from van stopped delivering fuel to my machine. so im guessing theres a transfer pump in these fuel tap kits? Jon Don installed so i not sure what these fuel tap kits consist of for transfer pumps. got 13 yrs out of it and could someone help me with what i may be needing as far as new...
  7. marco8

    3" marine hose from waste tank to Blower

    Thanks guys, may try to hard plumb!
  8. marco8

    3" marine hose from waste tank to Blower

    no warranty left on machine and don't mind getting new hose with wire if its a must have. have this hose and wanted to just do some maintenance on equipment this weekend. the hose on has a small dentation/callaps look on the small bend as the tank and blower are slightly offset. its been on...
  9. marco8

    3" marine hose from waste tank to Blower

    http://www.discountmarinesupplies.com/HOSE-Shields_200_Series_Exhaust_Water_Hose_Without_Wire.html
  10. marco8

    3" marine hose from waste tank to Blower

    the blower and waste tank hook up is not totally lined up so at 17" theres a slight bend and thought the wireless would be easier to work with but questioning it
  11. marco8

    3" marine hose from waste tank to Blower

    So I have a new 3" marine hose to put on but it doesn't have the reinforced wire in it. Will this hold up for awhile? before tearing crap out of old hose taking it off that needs replaced but is still doable should I hold off until I get a new hose that has the wire or put new one without...
  12. marco8

    What size v jet

    What size v jet are most using in their prochem quad jet wand?
  13. marco8

    best place and web link for replacement 20hp kohler for legend?

    Ended up buying from local kohler dealer. Price I paid was 1750.00 delivered. Not sure if it was a deal or overpaid but sure was convenient. Kohler command pro 20.5 hp. item CH640-3138
  14. marco8

    best place and web link for replacement 20hp kohler for legend?

    Done! installed in a day and ready to roll!
  15. marco8

    best place and web link for replacement 20hp kohler for legend?

    with a few months before busy season thinking ahead. may spend a weekend swapping engine to my legend xl. new van and tm could be in the works as well but want this tm to carry on. anybody have a link to the specific engine that will be my best bet/price for this legend? I like the kohlers
  16. marco8

    Heavy Duty Automatic Pump Out

    I have same pump, where did you get the rebuild kit? thinking I need diaphram
  17. marco8

    how many hours have you heard these prochem legends go?

    that was my next question if blowers and HX would outlast engine. guess I am on borrowed time. New ones so dang costly but...10yrs now on air cooled Legend. been a nice machine!
  18. marco8

    how many hours have you heard these prochem legends go?

    wondering if im on borrowed time. sure I have had small issues here and there but machine is back to running solid. Have 5300 on this machine and cant help but think about how much longer. curious on what others have experienced with their Legends
  19. marco8

    ignition switch part # for legend xl

    Thanks Todd! you guys have been so friggin Great! $14.00 compared to 38.00 through my vender.
  20. marco8

    ignition switch part # for legend xl

    Anybody know what part number or switch for replacement on Legend xl? thought I could pick up at half the cost from e bay,craigslist or local auto store.
  21. marco8

    update/engine shut off issue

    oh my, very! thank you!
  22. marco8

    update/engine shut off issue

    Bad ignition switch It was
  23. marco8

    Engine shut off issue/ any ideas

    Anybody know the item number on this ignition switch so im not paying double?
  24. marco8

    Engine shut off issue/ any ideas

    Bingo! Thanks to Everyones input! was bad ignition switch! ran hot wire to fuel solenoid till switch comes.
  25. marco8

    Engine shut off issue/ any ideas