Search results | TruckMount Forums #1 Carpet Cleaning Forums

Search results

  1. Prestige1

    cleanco 45 removal help

    I'm going to remove a cleanco 45 from my van. the shaft is a pain any suggestions? GMC 3500 2003 van
  2. Prestige1

    Cleanco truckmount removal

    I'm removing my cleanco 45 from my van, unit is still in great shape but the van is old. removal of the unit is pretty basic but the shaft is a pain. Any tips? Thanks in advance
  3. Prestige1

    swirls in high gloss black porcelain

    I have a customer that has swirl marks in her high gloss porcelain tiles (black). I am going to see it tomorrow. Any suggestions if this can be removed. I am guessing it is from either grouting or debris was under the cardboard floor covering the contractor had down.
  4. Prestige1

    Surrey BC Help

    I have a very very good customer in the Toronto area that has property through out Canada. Usually I travel to accommodate them but at the moment I cannot get away. I am looking for someone in Surrey to take care of a job for me. Would be very basic cleaning. Can anybody recommend someone. Must...
  5. Prestige1

    2004 Clean Co 45

    I recently purchased a used 2004 clean Co 45. It runs amazing the one issue I am having is when it is in High Idle it is very loud, Before I tear this apart is there a muffler or something in the unit?
  6. Prestige1

    porcelain tile help

    I have a very very good customer that has aprox 100 000 sq ft of new porcelain installed over 3 locations. The issue they are having is the tile surface just will not stay clean. We can clean it easily but as soon as someone walks on it the footprints are left. This a very busy retail location...
  7. Prestige1

    Scratched Mexican tile

    I have a customer that has some Mexican tile. There is a couple very minor scratches and 1 deep scratch. How do I fix this? The scratches are not in the finish they are in the tile 100%. Up here in Canada we don't get much of this tile so I don't work with it often.
  8. Prestige1

    GPM vs PSI

    What is the optimum set up of GPM and psi. I only clean hard surfaces.
  9. Prestige1

    Cork floor help

    I have a very good customer that has a cork floor in her business. How do I clean and seal this? Aprox 1000 sq. I did test with a soft brush and a mild alkaline and it did come up nice. But would take for ever for 1000 sq any help
  10. Prestige1

    Onyx Counter top polishing

    I have a very good repeat customer who has asked me to polish her Onyx vanity top I have done marble but never Onyx any tips?
  11. Prestige1

    cleaning epoxy coating concrete

    Need some advice. I am going tomorrow to look at some 3500 sq of coated concrete. The customer seems to think all it needs is a clean, they don't know exactly what it is coated with but only about 3 yrs old and they say no flaking or anything. Part of me want to run from this but thought I'd ask...
  12. Prestige1

    Truckmount vibration help

    I have an old Cleanco Classic PTO today I started getting a vibration when having the equipment at idle, ( power on belts running slow speed no vacuum or pump on) When I turn on vacuum vibration goes away. Belts are tight, pulley is tight. I am thinking pulley is toast. I have a video of the...
  13. Prestige1

    terrazzo help

    What is easiest way to determine if terazzo is cementous or epoxy
  14. Prestige1

    maintenance packages residential

    I am thinking of trying to launch a maintenance program for residential floors / showers any ideas / help would be great, frequency , costs, things to be aware of,
  15. Prestige1

    Epoxy grout Help Shower base re.grout

    We have started using epoxy grouts to re grout shower bases when required. But taking to long to set so we can get in and caulk the base. What epoxy grout sets the fastest? Any tips on this process?
  16. Prestige1

    grout removal tool

    What is the best grout removal tool. Primarily for a shower base 1 x 1 tiles. I have the hand tools and the dremel but want something better. "Please don't tell me the yellow Regrout tool" It doesn't work. Rate them on speed and ease of use and one that doesn't chip off tons of corners from tile
  17. Prestige1

    Buying new truck (help)

    I'm going to purchase a new van for truckmount install. What specs should I be looking at? I know I want extended but what weight should it hold? Tired of driving a piece of crap time to invest in a decent truck
  18. Prestige1

    Unloader issue

    I have an old clean co classic. I believe I have an unloader issue. The part number is 250-112. max pressure is 2500 psi any ideas on a replacement I could use.
  19. Prestige1

    Unloader issue

    I have an old clean co classic. I believe I have an unloader issue. The part number is 250-112. max pressure is 2500 psi any ideas on a replacement I could use.
  20. Prestige1

    Truck mount pressure issue

    Ok I have an old Clean Co Classic. Honestly it looks like hell but makes money. I have started to notice when running a spinner sx- 12 or Turbo tool I have both. The pressure drops to 600 to 700. When we release the pressure on the tool the gauge shoots up to 1200 to 1500 depending where we have...
  21. Prestige1

    Anti freeze

    im using a -50 anti freeze but it keeps semi freezing. Causing a pain in the ass. What is best anti freeze to use in my truckmount system
  22. Prestige1

    Ceramic &. Porelain coatings

    I know a ton of people will say not to do it but, competion is starting to build up around my area and I want a service others don't offer. What coatings are the best? What does Grout Life use?
  23. Prestige1

    Soap scum on natural stone shower

    Right now we use our steamer for natural stone showers. Works great but a bit slow. Any suggestions for quicker soap scum removal?
  24. Prestige1

    Large companies (10 trucks)

    Guys Kind of an odd question. Can you guys send me names of companies that have 10 plus trucks in their fleets. Looking for companies that specialize in tile and grout / marble etc Thanks
  25. Prestige1

    Minimum charges

    I know in different areas prices vary. My question is what are your min charge. I am $350 I don't do carpets only do hard surfaces. I have recently started charging a min for separate rooms. ex if I quote a kitchen and they want an upper floor washroom floor done then I am starting to charge...