Search results

Having trouble getting heat from the Legend. Just wondering if the Mytee Turbo heater can be used on this machine, or is this only used for electric machines? Im desperate for higher heat. I’m only getting around 130-140 max. really trying to avoid a propane heater, but if that’s all I can do...

Our legend is not putting out much 150 degrees just wondering if anyone knows of a way to get more heat without adding a propane heater? thanks for the help

Priming hose is filling up soap tank, and is not sucking I’m new to this machine. Is this normal? If not... any guess what the problem may be? thank you

I just talked to a Namco Rep. I wanted to order a husky. I needed one with a plastic fresh water tank . The rep told me he could send me a husky that has a fresh water tank (not a add on tank) I know the beast has a fresh water tank, but has anyone herd of a husky with a fresh water tank? I’ve...

PEAK QUESTION? 6 months ago I had new heads, and head gaskets put on my Peak GTX Since having it fixed, I now keep a close eye on coolant level in the plastic reservoir. Before we start cleaning, the coolant level reads about a inch below the full mark. After we start cleaning for a...

Just curious if anyone knows the amount of hours it calls for a water pump for the peak gtx? Looks like it's very hard to get to. Going to try and get it fixed tomorrow. Wondering if anyone had to replace one?

Just got our machine back from being repaired. The owner replaced both heads and gaskets. Today he noticed antifreeze that was slung on some chemical jugs . They were sitting towards the back of the machine towards the hose reels. While the machine was running he tried to see where it was...

My friend just got his Peak gtx repaired. Kohler 26 hp liguid cooled. He had 2 new heads and gaskets replaced.2 peaks low hours, 2 blown head gaskets. He's not a machanic but really dose good on maintenance to his machine He's herd that " back pressure' is the possible source of the continued...

2nd peak liquid cooled engine that's blown a head gasket...3000 hrs 1st engine / 1700 hrs 2nd engine. I thought the owner did a very good job maintaining his equipment. So what is it with these engines? I also wondered why PROCHEM doesn't put a engine temp gauge on these machines since there...

Anyone out there who has used Bridgepoint/ PROCHEM chemicals that found an alternative to their chemicals? Their chemicals our way to high, and I have to think there is an alternative to chemicals out there? I just don't know where to go? Cleaning agent … PowerPoint Pre spray… Flex/ citruSolv

I'm considering a adding a stop leak additive, until I can get it into the shop for repairs. I'm planning on replacing heads and gaskets. 1. Do you guys know if I could harm anything else by adding stop leak? 2.. Also... I'm having trouble locating the coolant drain plug on the block of the...

Just had bridgepoint bleed our radiator/coolant system. Our machine overheated after they worked on it. We later found out that ************* added 100 percent antifreeze(strait...no water). The peak gtx calls for a 70/30 mix. We are convinced that the pure antifreeze that was added made are...

Why doesn't the Kohler engine have a temp gauge? Shut my engine down today, and while rolling up hoses my overflow reseivor cap blew off. I checked my radiator, and it took a half gallon of antifreeze. Still don't know what caused the cap to blow off, but how are you supposed to Know if your...

I'm looking to buy a truck mount. Bridgepoint has a"used" Everest 650 for sale. It has 3.500 hundred hours... $15.000 thousand. I know that's a lot of hours for a machine. Does anyone know what the longevity of these machines are? For example... If the Everest 650 is purchased new, does anyone...

Trying to buy a affordable machine, and someone suggested Relia-Built. Just wondering if they make propane truckmounts? I only saw HX mounts on his site. Has anyone had dealings with Kacey? Does he warranty his equipment?

I'm posting this for my best friend. He is not a member. He is in search of a second machine. I know this site says it has used truckmounts for sale. I'm looking for suggestions. If any of you wanted to purchase a used truck mount... Where would you buy from?? (Truckmount forums, ebay, Jon-don...

Does anyone know if a Pro chem Peak TM will fit on a ford e250(not extended). Having trouble finding a chevy cargo 2500.

Just curious what others recommend? Currently have a chevy cargo 2500. Having trouble finding another Chevy 2500. Its been so dependable that im scared to change. Any opinions on other types of vans? Budget is only 10k.

Peak water presure problem I have a 26 hp water cooled Peak gtc truckmount with 1300 hrs.I always do Routine maintnace on time. If I ever noticed any kind drop in water pressure in the past , I would first check my screens, and normally they would be clogged with debree. That has always been the...

Peak water presure problem I have a 26 hp water cooled Peak gtc truckmount with 1300 hrs.I always do Routine maintnace on time. If I ever noticed any kind drop in water pressure in the past , I would first check my screens, and normally they would be clogged with debree. That has always been...

He guys. I'm fairly new to tile and grout. I have a bank to do next week with mainly tile. My problem is.... I have a bank to do next week and it is inside of a airport (can't use a TM at the airport)t. Its all tile. My portable only has 120 psi. Any suggestions on alternative ways in case...

Just recently bought this machine. Blower is starting to act strange. The vacuum was releasing way to early and often .I took it to Bridgepoint and they said they fixed it, but now it goes all the way to 13 on the gauge and will not release. The problem started while under warranty. Would like...

I posted this question in another area of the TMF. I was not sure if it was the right area, so I am sorry for any clutter. My good friend does not have access to this forum, and he ask me to post a question for him. He has a new Peak GTX 26 hp duel wand Tmount. His first machine was the...

My good friend does not have access to this forum, and he ask me to post a question for him. He has a new Peak GTX 26 hp duel wand Tmount. His first machine was the original Peak single wand. Anyway...with the original Peak Tmount if he was at a job cleaning he would notice that if the temp...

Posted this question in another forum. Can anybody direct my to a web site that sells a conversion kit that converts your 2inch hose into a 2.5 inch hose? I think I remember reading about such a kit in the past. it involved drilling into your waste tank to make the conversion. The purpose was to...