Anyone knows how to fix these tiles? These tiles are in a lobby around a water fountain and have turned white, I don't think its efforance, it looks like the factory finish has failed. I have worked on tiles with a similar issue in a shower with no improvement. Someone else has worked on few of...
I had a job where the poly carpet wouldn't come clean didn't matter what I did. Someone on this forum had used the two presparays together and had great results. I used the product and it was amazing to watch the carpet come out so clean and so easily. They work great together.
No, spill on the floor and spread out, and back roll. U can easily leave roller marks if not careful. If you add aggravate than its different. You put down the product with roller for like 10 sqft in a line and than backroll with different roller one way only. Its little tricky.
You few options, first you should wait at least 28days for the concrete to fully cure.
1. Solvent based acrylic sealer - cheap, roll down two coats. Cons, shine will disappear, and fumes when putting it down.
2. Guard - cheap, spray down to saturation and propane burnish to...
I saw that thread. There are so many Epoxys out there. The one I use is 100% soild, oil will never pentrate it. I would use degreaser and spinner but need to test first.
Sent from my SM-N910W8 using TMF Forums mobile app