Search results | TruckMount Forums #1 Carpet Cleaning Forums

Search results

  1. FloorSolutions

    Just Starting out

    In case i forget, you can toss me a call almost anytime. (516)270-5857
  2. FloorSolutions

    Just Starting out

    are you retarded? have you ever worked on Long Island? the vast majority is residential homes. how do i know that? because i have cleaned here for 16+ years. he's not in NYC where its mandatory, rolling around with a porty to million dollar long island homes is a TERRIBLE idea. Trust me, I...
  3. FloorSolutions

    Amtex dies again, 2x in 2 days... Buyer beware

    well, you did let a few posts i made blasting a TMF advertiser without a line of censorship, i'll give you that. so i would hope that applies here too, and to anyone's real opinion.
  4. FloorSolutions

    Amtex dies again, 2x in 2 days... Buyer beware

    man i hope your wrong Jimmy. that would be pretty messed up and slimy to be silencing people's honest opinions. not very conducive to saying you run an open and honest forum
  5. FloorSolutions

    Amtex dies again, 2x in 2 days... Buyer beware

    sadly enough, Jeff is far from the first guy ive spoken to that absolutely hates his amtex and has nothing but issues. sucks they have to still be scared to speak up, because Ben might get his panties twisted and cut them off totally. Fairly certain more and more guys are gonna stop caring...
  6. FloorSolutions

    TMF Dinner & Drinks With Dave Moonan aka Aloha One 9/10/15

    you better be making an appearance at ICE if your health permits it Dave. Im unable to make Vegas for experience with having a kid due in 2 months
  7. FloorSolutions

    Burned on a truckmount

    too many people like selling machines without checking them over....you woulda been better going with that particular guy, at least he makes good on his screw ups.
  8. FloorSolutions

    Burned on a truckmount

    juuuuuuuussssst to be a dick....buying a used machine that needs EVERYTHING replaced sounds a little too familiar to me. Especially if said person happens to be in a state bordering Mexico :) dont get me wrong, i like that person and all, but he needs to check his used machines much better
  9. FloorSolutions

    Mytee escape questions

    funny, everyone told me that when i got my 14/33....it is PERFECT for residential, and with the right cleaning process, you should be dry in an hour or two. that 33 blower runs me upto 200' on the regular, and i still get good dry times while using less than 1/2g of fuel per hour. unless you...
  10. FloorSolutions

    6 Jet Wand (USED) For Sale @ (2) 3 and 4 Prong Converters 2, 20 Amp Outlets

    no, from Tony. I was the one who brought it in with him when we found the governor was dead, it was pulling 5hg, among other things that would have accounted for several thousand worth of work.
  11. FloorSolutions

    6 Jet Wand (USED) For Sale @ (2) 3 and 4 Prong Converters 2, 20 Amp Outlets

    let me come from the woodwork and add my 2 cents.... I went to have that van checked out. I'm the one who payed jondon to go over it when the shit load of problems were found with it. THERE IS NO WAY you could not tell that thing was a piece of junk the second you started it. you knew...
  12. FloorSolutions

    6 Jet Wand (USED) For Sale @ (2) 3 and 4 Prong Converters 2, 20 Amp Outlets

    but just a few minutes ago you said "I ran the TM for s total of 15 hours and have pictures to prove it"
  13. FloorSolutions

    Velocity Technologies carpet cleaning machines - Legit or Scam

    teetering on the brink of 200 pages.....will the mark be hit?
  14. FloorSolutions

    Amtex Prowler wanted

    i was gonna suggest the same thing. but beware, they are new-old stock demo machines at Alan, but have been sitting for years now. They tried selling those to me 2 years ago
  15. FloorSolutions

    why do i keep burning through unloaders?

    im bad at keeping track of hours. ballpark i would say pushing 75-100 hours, and almost all of that is running at 1,000psi or over, since im almost entirely hard surface now. i know its not a lot, but many jobs my machine dont even run for 30 minutes while i spin 2 or 3 small rooms of tile...
  16. FloorSolutions

    why do i keep burning through unloaders?

    to post an update on this fiasco.....turns out in the end, my Hypro pump was the root of all evil in my machine. It had NOTHING to do with Nick, as that pump was installed brand new for me. Nick/EZ went above and beyond for me, and sent me brand new pump, regulator and parts to install it...
  17. FloorSolutions

    Ez 16-33

    first one he built me had a hypro on it. this time around he sent me an AR
  18. FloorSolutions

    Ez 16-33

    i could have swore i did post an update to that.....let me find that post and do just that incase i dident
  19. FloorSolutions

    Ez 16-33

    vinny got rid of a chemtex that totally and completely failed on me a month after i bought it. hxe ruptured, pump broke its mounting feet, and it needed a new engine, all with under 500 hours on her. Nick took some parts from it, and built me an EZ.
  20. FloorSolutions

    Ez 16-33

    yep. turned out it was a shit pump, that was brand new from steambrite, caused severe vibrations and literally vibrating so bad it was causing stuff to get eaten up and loosen. Nick sent me a new AR pump 3 months ago, when he did not have to considering all the trash i talked, and i have not...
  21. FloorSolutions

    Ez 16-33

    ive used it upto just over 200' and have had no issues. ive got the machine set to 15" and it loads up in literally 1 second. so i would say its for sure pretty good. ive only used a few other truckmounts tho, so my opinion may not be worth much lol
  22. FloorSolutions

    Ez 16-33

    ive got an EZ 14/33. works great, no issues now. 1 major issue, and turned out to not be Nicks fault at all. I do mainly hard surface, and it fits for me flawlessly. my profile pic is of my EZ
  23. FloorSolutions

    Just bought a Terminator 1200, how to approach next?

    you have one of the newer models i believe. the big, boxy square looking things are the older ones like i had. the big ones had 2 seperate pumps for low and high pressure, and you could not adjust either of them. the newer ones are adjustable with only 1 pump if i remember right
  24. FloorSolutions

    Velocity Technologies carpet cleaning machines - Legit or Scam

    by the part where he said wiring was done by a military engineer, means he's either lying, or needed to have the entire thing rewired after he bought it. i guess @Will Reed does not have the only (sort of) working model out there.
  25. FloorSolutions

    CHEM TEX 25HP Kohler Panther

    i think you'll find 99% of the guys here will tell you to get he amtex over the chemtex. its really a no brainer my friend.