I usually start at $28 per chair but can go as much as $45
but by the photo Id charge $28 each
I have one which is not extreme
that is at $15 per chair
I have a more bullet proof protector but thats at $60 per chair
Carpet is different
I usually start at $0.55 but can go as...
Why did you go for the bait?
And why should any of us give you confidential info.
Just reach out to them but do it on your own.
We have enough to worry about info being taken and who knows how it would be used
if its silicone and cured/dried all you can try to do is peel carefully and thats it. solvents dont work very well on this
By the looks of the picture it seems someone has already caused damage with attempts to removing it
Bonzer wins do to its cost and the ability to do the exact same work as a zipper
CX15 last, and although not as expensive as the zipper, its difficult in cleaning corners and edges
when I arrived at a job and the client was going out for coffee he said the place was empty and I asked if it was ok to get hot water from tub, he said sure go ahead place is empty. I went in to the bathroom to find his naked girlfriend taking and shower, with no shower curtain and to top it...
I am suppose to post My home made pump out ( not from scratch)
I Spent less than $300.00
I am going on 2 Years with the setup. Looks very clean and it does not clog or burn out. So far so good only thing I do is rinse my tank only and not the pump, and this thing runs on 12v and does...
Said it before and ill say it again, Tools do matter Yeah you can use a wand but the point to advanced tools is to make it easier and faster to get through a job but most important is Results are really what drive folks to spend and buy tools.
That spinning action acted almost like a 360 or a...
I deal with skunk quite often,
Thank the Lord Ive done well
This is what I have used and has worked
1. Odorcide 210 & Odorcide Skunk
& Bridgepoint Hydrocide
2. Green DS, mixed with klenz enzyme
Apply product by its self
Mix product with your pre spray and apply
Dang Guy, Take it Easy!!
Yes it might be an inconvenience and even to hear them ask , But you can aways suggest what I say"
Yes I can move the furniture but unfortunately I have a Minimum service fee of $250 for moving items or $175.00 hourly rate, for that rate it be best to hire a mover...
Nope, Mine never did either, I replaced them because like everything...it wears out for me it was cosmetics.
The swivels only would leak during waste disposal.
Solids with latch never Ever leaked on me.
Awesome product. I just wish theyd be more easily available. Would be nice if TMF sold...
We all can handle that machine no biggie. Max vacuum can only be 30" of HG and there is no way they place that much strain and stress on a waste tank and belts
Only thing that I wouldnt be able to handle would be the Gasoline bill, this thing would be a gulper, not guzzler
I check and adjust mine every time I run the rinse.
I have a 3.5 lead hose with a different jet to match the size of the tool Im using so it matches. I use the hi flow hydra, rotovac shear upholstery, bonzer and rotovac and Evolution wand and You just cannot set it and use the same setting the...
Ive said it before and ill say it again, hopefully no one will hiss at me for saying. I told you so!
I was never able to figure out how to stop them from leaking/dripping.
these flash cuffs are too expensive and leak.
I got to admit and agree cool cuffs do work,
I just wish Joe would make them...
I have the new 370SS
And I prefer it over the Hydramaster. I would check to see if the exchangers are still copper. The SS for what i was told are stainless steel.
Ive cleaned tile and grout at 1400 and heat at 210 for 45 minutes straight without any issues with the hydroforce spinner the 15...