Screens did not change a thing!! Screens are not slowing water flow at all.
Removed jets. Maybe 3/4 of a cup more water! Over one gallon now with all jets removed.
I will do measuring this week to get exact quantities.
A 2 jet will give me more flow for sure.
Jim I did not even think of removing all my jets for a gross output!! I will do that and record the numbers as well.
I keep thinking theres gotta be a little more there if I'm getting the same output from 3-500 psi.
Yes you are correct. For very little money i can improve mine I will. I have been wanting the mytee water hog . Its only 50ish pounds and pump up to 1200 psi. I think that set up with 3/8 lines would.be really nice.
Honestly I would be happy at 1.15-1.25 for now. And I should be able to get close to that at 500 psi. Only one thing to do. Tomorrow I will spin the screens off and run the tests again!! Will see if bo screens makes a big difference!
Thanks for the info but I only use my porty for the pump now. I use a mytee air hog for my vacs. And it's very powerful suction. I know I could use a bit more water for quicker cleaning times.
I have two inlets going into my ametek pump and there are no restrictions in the lines...
Jim you said top hat strainer. Is there a strainer or filter in my wand trigger anywhere?? If there is, I have never removed it!!
I have taken the strainers out of all 4 jets and they had quite a bot of rust in them.
Thanks for the great info!! I have to agree with you fully. And I was afraid you where going to say my line on my wand from the valve down to the spray bar(SINGLE LINE TOO) was going to have to be changed!!
So you are saying jim that my 1.5 jets are NOT too restrictive and it's all...
Ok so did a little 60 second test today with my wand and then pump on.
Wand is mach 12 with 4 jets. Jet size is 110015 soooo 1.5 gpm.
Pump is ametek 500 psi pump.
@ 200 PSI 60 seconds I get 3 liters
@ 300 PSI 60 seconds I get almost 1 gallon
@ 400 PSI 60 seconds I get almost 1 gallon
@ 500 PSI...
I'm not saying anything bad at all about courtney. I like him and his videos. Hes very professional.
My beef was how slow he had to do his strokes in this video to remove the dirt.
When I use my CRB the dirt becomes very uniform and the carpet one color. That's because it all suspended...
Theres not a thousand ways to make it look it's best and cleanest for the customer! Theres only one way to make it look better then all the other ways in a considerable amount of time!!!
Sucking dirt is one thing, making it look pretty and satisfying the customer is another.
Watched a Truman Steamers video earlier this evening.
He professed with the proper chemistry he did NOT need to use a CRB machine.
He said his heat would take the place of a CRB.
I did notice he really had to slow the wand down. Slower then what I run my wand at after using my CRB...