Search results | TruckMount Forums #1 Carpet Cleaning Forums

Search results

  1. marco8

    3" marine hose from waste tank to Blower

    Thanks guys, may try to hard plumb!
  2. marco8

    3" marine hose from waste tank to Blower

    no warranty left on machine and don't mind getting new hose with wire if its a must have. have this hose and wanted to just do some maintenance on equipment this weekend. the hose on has a small dentation/callaps look on the small bend as the tank and blower are slightly offset. its been on...
  3. marco8

    3" marine hose from waste tank to Blower

    http://www.discountmarinesupplies.com/HOSE-Shields_200_Series_Exhaust_Water_Hose_Without_Wire.html
  4. marco8

    3" marine hose from waste tank to Blower

    the blower and waste tank hook up is not totally lined up so at 17" theres a slight bend and thought the wireless would be easier to work with but questioning it
  5. marco8

    3" marine hose from waste tank to Blower

    So I have a new 3" marine hose to put on but it doesn't have the reinforced wire in it. Will this hold up for awhile? before tearing crap out of old hose taking it off that needs replaced but is still doable should I hold off until I get a new hose that has the wire or put new one without...
  6. marco8

    What size v jet

    What size v jet are most using in their prochem quad jet wand?
  7. marco8

    best place and web link for replacement 20hp kohler for legend?

    Ended up buying from local kohler dealer. Price I paid was 1750.00 delivered. Not sure if it was a deal or overpaid but sure was convenient. Kohler command pro 20.5 hp. item CH640-3138
  8. marco8

    best place and web link for replacement 20hp kohler for legend?

    Done! installed in a day and ready to roll!
  9. marco8

    best place and web link for replacement 20hp kohler for legend?

    with a few months before busy season thinking ahead. may spend a weekend swapping engine to my legend xl. new van and tm could be in the works as well but want this tm to carry on. anybody have a link to the specific engine that will be my best bet/price for this legend? I like the kohlers
  10. marco8

    Heavy Duty Automatic Pump Out

    I have same pump, where did you get the rebuild kit? thinking I need diaphram
  11. marco8

    how many hours have you heard these prochem legends go?

    that was my next question if blowers and HX would outlast engine. guess I am on borrowed time. New ones so dang costly but...10yrs now on air cooled Legend. been a nice machine!
  12. marco8

    how many hours have you heard these prochem legends go?

    wondering if im on borrowed time. sure I have had small issues here and there but machine is back to running solid. Have 5300 on this machine and cant help but think about how much longer. curious on what others have experienced with their Legends
  13. marco8

    ignition switch part # for legend xl

    Thanks Todd! you guys have been so friggin Great! $14.00 compared to 38.00 through my vender.
  14. marco8

    ignition switch part # for legend xl

    Anybody know what part number or switch for replacement on Legend xl? thought I could pick up at half the cost from e bay,craigslist or local auto store.
  15. marco8

    update/engine shut off issue

    oh my, very! thank you!
  16. marco8

    update/engine shut off issue

    Bad ignition switch It was
  17. marco8

    Engine shut off issue/ any ideas

    Anybody know the item number on this ignition switch so im not paying double?
  18. marco8

    Engine shut off issue/ any ideas

    Bingo! Thanks to Everyones input! was bad ignition switch! ran hot wire to fuel solenoid till switch comes.
  19. marco8

    Engine shut off issue/ any ideas

  20. marco8

    Engine shut off issue/ any ideas

    Thank you Jim
  21. marco8

    Engine shut off issue/ any ideas

    what would all I have as far as kill circuits on this legend? oil sensor, float switch?
  22. marco8

    Engine shut off issue/ any ideas

    sure will do this next with ground checking
  23. marco8

    Engine shut off issue/ any ideas

    yes pump is working and box is full
  24. marco8

    Engine shut off issue/ any ideas

  25. marco8

    update/engine shut off issue

    so..changed out fuel pump. I figured out I can hold engine over ride switch held over and can start and idle fast running good. as soon as I let go of over ride it dies. I can however get it to idle low w no over ride but as soon as I rev up it dies. could it be a fuel shut off solenoid or...