So I carefully went through the owner's manual and looked at some of the diagrams of the machine.
I've got to be honest I don't understand why your mechanic cannot figure this out it seems not to be overly complex.
1 check is is the fan to triggering on at the right temperature.
I did it to my power clean Genesis I didn't pay Jedson do it but I was inspired by their video. And removed everything myself cleaned it up and made it look pretty
It worked out good for me it didn't change the fact that the machine was old and had some Warren down components. removing the heat...
Okay with GFI and gfci outlets in bathrooms they're designed to keep you from being electrocuted. Not just for the sole purpose of overload.
So if there is a source of water on the end of your plug or even on the outside of the cord a cut in the cord are moisture anywhere around it I have seen...
We used to get a noise complaint when we had a butler.
Waited a week came back finish the job never had the cops bug us again.
I do have to say go super high power port run it inside the building it'll save you all these headaches autofill Auto dump you don't have to stress
I have seen push on blade terminals get hot and expand and create a bad connection if you have them in your system I would recommend checking them out for carbon traces
Most common points of failure in a machine is butt connectors and crimped blade terminals. At least that's where I would look
Yeah you nailed it that's the most common issue.
On my first machine I replace my bearings the second they start making noise and I haven't had to replace any gears yet in that machine.
But I did buy a second machine from Craigslist that had stripped gears and that was the issue. That machine...
Great looks like I'm going to have to save some pennies!
My experience with the Austrian machines. they don't break often but when they do parts can be difficult to get.
Mytee has excellent customer service when I want to add pump out to my speedster the parts are easy to locate on the website...
Yeah I just found out that I'm going to need some work done on one of my shoulders and my other one isn't looking too great I'm going to need a push pull style wand. The Bentley pro looks like a real winner John.
I understand also if you don't want to answer this question till after it's at...
So I found out that both of my shoulders are shot may need surgery in one of them
So I'm thinking of trying a push pull style wand.
I had a bonzer it was stolen lol I did like it but wasn't in love didn't get to try it very much.
Never have touched a zipper
I really like the look of the Bentley...
I can't wait to see what mytee going to be coming out with.
I wonder if cross American corporation will be there with their latest machine. See if he fixed some of the issues with his current offerings
First off you're smart taking classes first.
Second wool is way tougher than instructors at Jon don let on. mostly because they don't want to be responsible for guys ruin ing any thing.
I always recommend rug washing. not rug extracting. But of course you can under certain circumstances even...
Oh boy I wish I could get my hands on your van!!!
Placing one BCM is unusual but they have 2 replace to shows that something is causing them to go out.
The first thing I would do is throw a multi channel oscilloscope and check the waveform coming off of the alternator which is controlled by the...
Because there's wheels on the back of never l had to pick it up lol [emoji38] other than to set it in and out of van
I don't think it's a big deal to carry a little over a hundred pounds I've been very happy with my machine the big wheels on the back make it pretty convenient to go up and down...
Yes you could switch to 6.6 two stage or could go with Lx in parallel.
Maybe smart to go with any vacuum motor without a thermal cutoff.
My suspicion is the cheap wire connectors that are used in that machine could be burnt and carbon. it is possible he's putting a lot of foam but man it takes...