Search results | TruckMount Forums #1 Carpet Cleaning Forums

Search results

  1. The Carpet Cleaning Pro

    waste tank full cut off stopped working

    Hi. Do you have any idea how the waste tank full cut off works on my Ace Chemspec. Mine has stopped working. The float switch is good as it activates a full indicator light on front of machine but does not cut machine off when tank is full. It used to work OK.
  2. The Carpet Cleaning Pro

    High Temperature Problem

    I am struggling to find a company ship me one to UK. Any ideas?
  3. The Carpet Cleaning Pro

    High Temperature Problem

    That seems a great idea. How would I wire it in to dump when to set Temp?
  4. The Carpet Cleaning Pro

    High Temperature Problem

    It' on the heat exchanger at the bottom of mathing on the left hand side when facing from front of machine
  5. The Carpet Cleaning Pro

    High Temperature Problem

    There is more than one of them. Yes they are nasson
  6. The Carpet Cleaning Pro

    High Temperature Problem

    My Chemspec Ace Truck mount dumps water when I set to the higher temp of 240. When set on 180 everything is ok. I'm guessing the problem is the sensor. Where is it? There seems to be a few sensors on the exchangers but I have no idea which one it is. Can anyone help?
  7. The Carpet Cleaning Pro

    Hi Rob. Can you ship your chemicals to the UK. I am seriously interested in purchasing some of...

    Hi Rob. Can you ship your chemicals to the UK. I am seriously interested in purchasing some of them as you seem to take the time and effort into putting the correct ingredients together creating the correct chemistry. I look forward to hearing from you. How about suppliers here in the UK...
  8. The Carpet Cleaning Pro

    Urgent help needed

    Machine runs great on 180 but when set to 240 it cools down by dumping water. Is it the nason 230 switch or somehing else?
  9. The Carpet Cleaning Pro

    Hi Todd. How are you? I wonered if i could pick your brains. My chemspec truckmount runs great...

    Hi Todd. How are you? I wonered if i could pick your brains. My chemspec truckmount runs great when set to 180. When on 240 the water temp drops. It dumps water. Is the problem the nason switch that needs replacing?
  10. The Carpet Cleaning Pro

    Tips for maintaining water temp on upholstery cleaning

    That' what I used to do. I had a steam genie truck mount with a propane heater. When I cleaned upholstery I never used the propane heater. I used an Ashbys steam mate electric inline heater. I run my hoses in to the property and connected to inline heater then a small pressure hose from that...
  11. The Carpet Cleaning Pro

    Temperature Switch...which one???

    My machine is dumping when i set to 240F Is this the switch that needs replacing?
  12. The Carpet Cleaning Pro

    Hi Rob. I have watched your videos and think they are great. I have been cleaning carpets for...

    Hi Rob. I have watched your videos and think they are great. I have been cleaning carpets for over 20 years in the UK and still find your videos very educational. I would be interested in seeing a video explaining all different types of wands... 4 jet, 2 jet, carpet cleaning wands, the...
  13. The Carpet Cleaning Pro

    Getting allot of complaints about the noise of my truckmount

    Hi guys. I am running an ACE Chemspec truck mount and get allot of complaints about the noise the machine makes. I was thinking of taking the 2 exhausts down through the floor and connecting them to a standard van silencer ( I think one is for engine and other for blower... I think the blower...
  14. The Carpet Cleaning Pro

    How can I increase my carpet cleaning business?

    Don't forget to collect emails and phone numbers and re market your existing customers every 3 to 6 months. Its expensive to gain customers....so do a great job and then follow up on every customer. I also leave my customers plenty of cards to pass on to their friends and family.
  15. The Carpet Cleaning Pro

    Urgent Help Required... Last step chemical problem

    no air leaks meter block is ok lines are ok fittings are ok I will check flow direction. I just swapped the valve and put it back as old one was...so guessing it should be correct?
  16. The Carpet Cleaning Pro

    Urgent Help Required... Last step chemical problem

    Just fitted a new 3 way valve... like for like. I have fitted new valve exactly same as it was before with old valve. Now I can NOT get chemical system to prime ... even when using vac hose. Any ideas guys???
  17. The Carpet Cleaning Pro

    Urgent help needed

    When out working today the machine developed a small leak from the small hole in the circular black rubber on top of the vacuum gauge. What is causing this?
  18. The Carpet Cleaning Pro

    Urgent help needed

    Just need to check something. When choosing 180 I assume the switch is pushed upwards and Down for 240. Is it currently set to 180 in picture?
  19. The Carpet Cleaning Pro

    Urgent help needed

    Thanks Todd. It defiantly is only dumping water when set to 240. When on 180 I get good heat. It goes over then settles back to 180. If switched to 240 it drops to 140 and doesn't really climb back up.
  20. The Carpet Cleaning Pro

    Urgent help needed

    It is dumping water into the tank
  21. The Carpet Cleaning Pro

    Urgent help needed

    When running today I noticed when heat switch is set to 180 it runs at 180. When switch set to 240 the temp drops. Does this mean 230 sensor is bad?
  22. The Carpet Cleaning Pro

    Urgent help needed

    I am changing blower oil on my machine. Where do I pour in new oil? How much oil do these blowers take?How do I know when it's full?