Search results

  1. Bob the floor guy

    Setting the valves on propane burnishers

    Here’s something I haven’t seen on here. Where does everybody set theirs at. On a Kawasaki fh500v the manual says between 004 and 006. Has anybody noticed a difference if u set them at 004 or 005 or 006. As in how much u can smell the propane exhaust. Is there any tips to make it better or...
  2. Bob the floor guy

    LVT

    How do I get this out of lvt?
  3. Bob the floor guy

    Wax on ceramic tile

    In this case it came up pretty easy. All I used was a hand brush and few minutes dwell. So not to worried.
  4. Bob the floor guy

    Wax on ceramic tile

    The strippers I use all say cold or Luke warm.
  5. Bob the floor guy

    Wax on ceramic tile

    Agree, believe it or not I used grout master first and that didn’t get all the wax off so I mixed in some betco extreme stripper with it and that was the result. I bid it at 3 dollars a square
  6. Bob the floor guy

    Wax on ceramic tile

    Another case of someone thinking it’s the best thing to do!
  7. Bob the floor guy

    Best way to clean slate tiles

    Thanks Scott. This is post construction cleaning and I’m getting water flipping from the squeegee. This will be a regular maintenance thing and was wondering how to prevent this. If I go diagonal to the tile it doesn’t happen. That’s not always gonna be able to happen. Guess I’ll just have to...
  8. Bob the floor guy

    Best way to clean slate tiles

    I scrubbed this with an auto scrubber and this is what happened. What’s the best way to clean this type of floor? Thanks in advance
  9. Bob the floor guy

    Sealer or sugar

    Already told that to the custy
  10. Bob the floor guy

    Sealer or sugar

    Thanks everybody for the info, they are going to wait until the fall when they close down and then do the stripper and dwell time to get it all up and then apply sealer.
  11. Bob the floor guy

    Sealer or sugar

    I’ve already done that; 175 with strip brush and a hand held grout brush and this is where I’m at now. I had a feeling it was old sealer
  12. Bob the floor guy

    Sealer or sugar

    Stripper makes it milky and kind of soft. Then it dries to this. Used a couple of high ph cleaners (9-12). They didn’t touch it.
  13. Bob the floor guy

    Sealer or sugar

    I’m in pa but This DQ is closed in the winter
  14. Bob the floor guy

    Sealer or sugar

    The Black is the color of the grout. The white stuff is not wanting to come off. It will scrap off but there is a lot of it
  15. Bob the floor guy

    Sealer or sugar

    This is a Dairy Queen, any ideas. And what has anybody found that works best to get the grout clean
  16. Bob the floor guy

    Stripping VAT

    Well put
  17. Bob the floor guy

    Stripping VAT

    You must keep it wet, never strip dry or u could cause the asbestos to become friable. Friable is the word they use for the dust. Please keep it wet and once u r done stripping get a layer of wax on it as soon as possible.
  18. Bob the floor guy

    Oil stain off of concrete

    I will definitely bring it up to him. Thank you both
  19. Bob the floor guy

    Oil stain off of concrete

    Thank you for the info. It’s an old building, 60’s or 70’s. Been a grocery store up until a few years ago. Changing it into a new Chrysler dealership. Tile has been removed since last spring. So doubt I’ll have much problems with moisture, plus it me and the general contractor who are doing it...
  20. Bob the floor guy

    Oil stain off of concrete

    This is how we are going to do it. I’ll take some pics when we do. Doing a 30 by 80 area. On that 3 by 3 area we used dawn dish soap. Worked just fine for what they want.
  21. Bob the floor guy

    Oil stain off of concrete

    Thanks for the info
  22. Bob the floor guy

    Oil stain off of concrete

    Doing 47,000 sqft post construction clean and this spot is where I’m putting down an epoxy. Just want to make sure it sticks.