Search results

  1. A

    Prochem blazer xl

    Yes you will need to go to a lown mower place where they will check it and ajust it if needed or you can do it yourself if you familiar with engines
  2. A

    Prochem blazer xl

    Got you will take back to lawn mower shop and have it checked again to see if it's 3200 I think he put it up to 3600
  3. A

    Prochem blazer xl

    Thank you so much jdarnold so basically i i have to have machine on idle and make adjustment to 3200 I have learnt so much from you guys wish I had people like yourselfs in uk not even prochem told me to check rpm all they said is you need this and that so which I didn't even needed thanks one...
  4. A

    Prochem blazer xl

    Im going to have a look tomorrow where would this plate be
  5. A

    Prochem blazer xl

    All pullies are the same on my machine the rpm has been cranked up my question is that do i need to put it on full load/rev to get the rpm at 3600 or should it be on idle
  6. A

    Prochem blazer xl

    It's belt driven does the engine needs to be on 3600 on full rev with any pipes attached to the machine or not attached
  7. A

    Prochem blazer xl

    Hi all after spending hundreds of pounds finally took it to a lawnmower to see if the rpm was low and yes it was 800 rpm low has been cranked back up going to put it to the test tomrrow will keep you posted thank you sooooooo much guys
  8. A

    Prochem blazer xl

    Hi sir thanks for the reply how do i check the rpm if its correct or how do i increase it if it's not on right rmp
  9. A

    Prochem blazer xl

    No sir I have flushed all my waste tank out with pressure hose and all inlets hoses I'm just really struggling to figure it out
  10. A

    Prochem blazer xl

    Have you managed to figure out what's the problem I have tried almost everything still no joy
  11. A

    Prochem blazer xl

    Hi all I'm new wonder if anyone who can help on prochem blazer xl I seem to have less suction than before I have replaced waste tank gasket relief valve is working fine too also cleaned hx still getting less suction the blower has been oil changed on a regular basis and greased when needed wd40...