Search results

  1. brendan

    Hydramaster machine problem.

    Hi Sbsscn, A moisture trap, that’s a new one for me. Where would you find it. Looks like the problem was a fuse and fuse box arking. Sending a faulty signal to the rhd box. Ran fine the last few days .
  2. brendan

    Hydramaster machine problem.

    Hi Monicaaa, There two brass bolts that connect two black boxes to the frame beside the diverted.
  3. brendan

    Hydramaster machine problem.

    I cleaned the filters, never knew there where filters there.The previous owner had a fuse joining the wires that goes to the pump. Think the fuse housing was arking, causing a bad signal to the rhd box..
  4. brendan

    Hydramaster machine problem.

    Hi,yes it comes on,been at it for 5 hours now.It just so intermitten,this stage im lost
  5. brendan

    Hydramaster machine problem.

    Anyone with a maxx 450 diesel know what might be the problem.Run the machine from cold,about 40 mins heat by pass,heat protection and over heat engine lights start flashing ,turning the machine off.Checked thermostats,changed relay that the shut downs connect to.Disconnected vac block...
  6. brendan

    Which one

    Ha ha, should have known .Yeah but interested to hear how you get on. Talking to some guys who bought something similar up the North. Love them. Sprayborg a little expensive.
  7. brendan

    Which one

    Hey John, you from this side of the pond.
  8. brendan

    Which one

    Sound John , thanks.How much are they?
  9. brendan

    Which one

    Never used a spray borg or similar. Would you sell your cimex to buys borg?Thanks.
  10. brendan

    Leather restoration

    Had a day doing leather restoration, dyeing and repair. Can't believe how you can bring a run down ripped and worn couch back to looking great. Thinking about doing the 3 day course. Anyone else offer this service ?
  11. brendan

    Pads or brushes

    What do you prefer to use on a cimex on commercial ,pads or brushes for encapping. Pros and cons....
  12. brendan

    Cimex pads

    I ordered some pads for a cimex , they did not arrive. I have a large commercial , would the normal red pads cut up for a the cimex be to aggressive with this machine.
  13. brendan

    Heat loss on my hydramaster maxx

    Thanks for all your help.turned out a easy fix,broken wire into a valve that connects the vac hose to the diverter..
  14. brendan

    Heat loss on my hydramaster maxx

    Matt the control arm diverter,when running the machine,should the arm move when you press the divert switch?
  15. brendan

    Heat loss on my hydramaster maxx

    Hi,my maxx is only getting up to 180 .I opened the lid and ran machine and i did not see any dumping.The diverter when on is not making the noise it usual does when on.Something not right,thermo valve or solenoid or something else?
  16. brendan

    Pump oil

    Anyone know how my litres the pumps take?
  17. brendan

    Pump oil

    The markings have come the bottle,but its the oil i used in my blazer,wonder would it be same.
  18. brendan

    Pump oil

    I am going to service my hydramaster maxx pump.Can i use the same oil as i used in my prochem blazer pump?
  19. brendan

    Google plus page vanished

    Follow Daves instructions and you should be fine.
  20. brendan

    Google plus page vanished

    No mate,its a google bug.Happening to thousands...
  21. brendan

    Google plus page vanished

    Lol,defo ruin the day something like that.....
  22. brendan

    Google plus page vanished

    Hey Dave,hows things,as always thanks,hope you and the family well.Got it sorted,i was on the help forums and exactly what you said worked.
  23. brendan

    Google plus page vanished

    Anyone know whats happening,google plus page has disappeared again?