Search results

  1. L

    Vacuum Solenoids

    You might want to check the 2 check air valves on the vacuum tubes near the water pump. I think you can check the actuator by removing one vacuum hose and covering the hole with one finger. If the actuator moves easily might be broken. Also one technician recommend me to always lube the Piston...
  2. L

    Getting gas smell out of carpet

    It's not new carpet, but whenever I clean it it comes like new. The guy is on the cheap side and he calls me 3-4 times a year when the carpet looks like trash. Thanks for the input guys! The carpet is only in the serving area so I am guessing somebody must brought it in on their shoes.
  3. L

    Getting gas smell out of carpet

    Hey guys , I have a regular customer with a restaurant. He called me today and said that some customers complained about a gasoline smell. Any ideas of what I can use besides the regular cleaning? I have a truckmount if that helps. Thanks!
  4. L

    Need help with some stains

    I was able to get it out only with anti browning solution. I sprayed it on top, left it for 10 min and wipe it off with a Terry towel. It had probably wicked from the padding in the drying process. I was afraid that it had discolored the fabric but it was ok. Thanks guys for the input. I can't...
  5. L

    Need help with some stains

    Thanks Todd i will try that and keep you posted. I will take some pictures tomorrow.
  6. L

    Need help with some stains

    Hey guys , I need a piece of advice. About 2 weeks ago I was cleaning a customer carpet and when I grabbed my spray bottle and the cap came unscrewed spilling about half of it on the carpet( hdx spray bottle from Home Depot). I had in it the cheap carpet cleaning spray from dollar tree that I...
  7. L

    Repair help

    yes, thanks I hope they have it in stock on Monday!
  8. L

    Repair help

    Hey guys, I am trying to put a new engine on my Boxxer 421. I removed the old engine and inside the coupler between the shaft of the engine and the blower I found 8 pieces of rubber that makes the 2 shafts turn. Some of them are damaged after 15 years [emoji14] and I would like to change them...
  9. L

    First year with a truckmount in the COLD!!!

    Mine is receiving the signal thru 2 walls and the van closed. Not 100% of the time but close enough...on amazon I saw some have 300 feet range. Try and keep the unit near a window facing the trailer! Sent from my SM-G930T using TMF Forums mobile app
  10. L

    First year with a truckmount in the COLD!!!

    Is an accurite which I bought at home depot! Basic model, nothing fancy, range for the sensor about 150 feet or so they say... was about $15. If u need longer range or alarms u can check online.... amazon has a few models. Very convenient for me as I don't have to go and check the van a few...
  11. L

    First year with a truckmount in the COLD!!!

    About 100 feet Sent from my SM-G930T using TMF Forums mobile app
  12. L

    First year with a truckmount in the COLD!!!

    I use a remote thermometer sensor so I can read the temp in the van which is Parked in my garage with a heater inside. Right now is -17 °C outside.... Today I did a job with -15 and my solution hose froze before I could start spraying! I had to take it into the customer house and immerse it in...
  13. L

    Jon Don Products.

    Just used Bad Dog on some urine spots. Got them out in 30 min...so I would say give it a try. Also another good thing is that it doesn't have that acidic smell like other products I tried before. Sent from my SM-G930T using TMF Forums mobile app
  14. L

    Boxxer 421 fuse blown

    I thought to write back and let the others know that the problem was that small electrical piece which actually is called a diode. It was broken so the short was there. Replaced it with a new one boght at radio shack and all works fine for now! I was about to order the temp controller a 155 $...
  15. L

    Boxxer 421 fuse blown

    Hi guys! Me and a friend bought a boxxer 421 which has a few problems! Right now we are stucked on a fuse that blows as soon as we start the engine! It is the main temp control fuse! We think this leads to the overheating of the machine and the fact that the dump valve on the waste tank not...