Search results

Thank you for your suggestion! The peroxicap is labeled wool safe but I havent cleaned immense amounts of wool with it so yet to have a problem. But, I would prefer to air on the side of caution and will take your advice! Many thanks!

Thanks so much for your suggestion! I'm not sure if the backing is jute but either way I'm going to use minimal water.. either one earth prespray with cold water or peroxicap with warm water. And extract at 200psi as you suggested. We'll see how it goes!

I am thinking of misting on a wool safe fine fabric pre spray, then using a hand bonnet on the edges, and rinsing with the saphire upholstery hand tool. Do you think this is best? I fear of overwetting otherwise. How would you tackle this? Many thanks!

Apparently someone brought Chinese food for everyone in the office... it's sauce or oil that dripped from the bag! my concern is that by attempting to self clean with the Bissell product, it set the stain... I used a whole line of different grease removers to spot test with no success

I appreciate you're advice! I'll update after the job. Thank you

Thank you scott! I dont have the 175 or pads and my supplier is closed this weekend for Easter and he needs me saturday. I was going to try perky spotter or flex with citrus solv. Pre spray ... manual agitate with a brush.. and Rotovac to extract... would I be wasting my time with this method...

Thank you Robert!

Hi all, So a great customer of mine called saying that an employee had carried a bag of Chinese food across the office not noticing that it had been dripping all the way to the lunch room! Please see pics... the stain is about 30 feet long... I having JUST taking out a huge donut oil spill/...

Hello all, I've been having problems with my Kholer engine overheating. I see that it may be due to a small leak in the coolant moving from the rad to engine. Any suggestions with regards where to take this? It has been hard to find someone to look at it because its hooked up to the TM. Any...

Hi Seagrtj, Its a white magic commander ho... best pic i could get... had oil cap pop off/ spill a few months back and they stopped working a few months later. Had my tm guy look at it and test the system. We figure it must be these solenoids... sorry for the crappy pic. Sent from my...

Hello all, Thanks to all TMF people who have helped me over the years with my white magic! In the early fall my vaccumm solenoid switches stopped working and i have been using the TM ( albiet sparingly in the winter months-up here in Canada) by manually opening and securing the heat exchanger...

It is located at a very awkward corner in the big city... job will start at 10pm... our truckmount isnt direct drive and runs on a loud 28hp kohler which is loud AF ( dont want to disturb the peace). also, we would be blocking a private parking lot or have to hose through a busy sidewalk... it...

Thank you for your advice! There are about 20 tables and chairs that have to be moved so i figure it will take closer to 3 hours with the portable.. 500 was the confirmed price. I dont own a pad cleaner/agitator but will be using a 360i rotovac at 200psi and a brush and scraper to agitate if...

Thank you Barry! And neat video! Sent from my SM-G903W using TMF Forums mobile app

Also... there is no way to access with truck mount and will have to use a 200 psi ninja... probably a ton of flex citrus solve and powerburst Sent from my SM-G903W using TMF Forums mobile app

Hello all, I got a call to look at this restaurant carpet with lots of grease build up. Its one of the worst i've seen .. the previous owner never had them cleaned... in total the area spans about 400 sft. (65 seat restaurant) normally, for this space i would charge around 250cad... (night...

I put a heater in my van .. its sulated with a spray foam... also i run anti freeze through the lines if temps go below -5 Sent from my SM-G903W using TMF Forums mobile app

The problem must be the solinoids because i checked all the wiring .. no breaks ... everything is sending charge. Temperaliy i used wiring to hold open the diverters to ensure that i get hot water.. today this worked well for the one job i had. In the meantime i will have to look into whete i...

Thank you. I will ask him to do a compression test. Sent from my SM-G903W using TMF Forums mobile app

Update.. I had my engine looked at by a machine specialist. He says it runs fine.. will replace the oil and fuel covers and temperarely fixed the oil cap on with some wiring. I was playkng around with the hx today.. still no vaccumm to pull the gears.. but suction is strong and high...

Commander ho... kohler 28hp aegis Sent from my SM-G903W using TMF Forums mobile app

Thanks so much for your attention here barry. This was very helpful. Will report back as i seek to resolve the issue. Sent from my SM-G903W using TMF Forums mobile app

It was dark and fairly thin.. maybe a little milky.. and we had just changed the oil about 3 weeks prior and only put about 10-15 hours on the machine Sent from my SM-G903W using TMF Forums mobile app

Thank you barry! I will have this checked out immediatly Sent from my SM-G903W using TMF Forums mobile app

Also recently.. we had pump seals replaced as they were leaky and noticed some hairline cracks in the ceramics of the pump so i ordered new ones and will have them replaced soon. Another problem I had this week is that the heat exchanger doesnt seem to work so we don't get hot water.... i...