Search results

I had a problem like this once. Ended up being heavy urine in the underpad along with self cleaning using those dumb grocery store machines.

Calm down John.

John calm down.

John calm down.

Florida hospital admits its COVID positivity rate is 10x lower than first reported | Just The News https://justthenews.com/politics-policy/coronavirus/florida-lab-admits-its-covid-positivity-rate-was-inflated-90 And others but I'm starting a job now so you are on your own.

Bruh... Florida testing errors are real. Look it up!

When I started I worked for a company who used a rotobrush. Same idea as this. Big chunks got caught at hose top and I'd panic every time the brush and hose got caught.

Im not familiar with that equipment...Do you cut the 1 inch holes in the trunk? (And plugs)

Electric duct cleaning systems are meh ...I bought a system like your showing at one time when my gas unit was down for a while. They are heavy and not for one person long term. You'll dim the lights on older houses when powering up especially when house has glass fuses. At some houses with...

Check float valve assembly.

I missed a 0 it is an extra 100000miles on van engine.

I've been told by a dealer that it's more like 30 to 50mph. Which would mean you have an extra 10000miles on van. 297000miles in total. I would guess it has little life left. If you do it it best be cheap. Like real cheap. Because the van ran its entire life...everything starts to go. I had a...

Haha. a little. You know me mrotto. I do like it. Smell concerns me for sure. I like the diesel and I like I wont need a fuel cell. I'm not stuck on it by any means. In Ontario there are like 2 maybe 3 dealers. One of them I dont like as i have dealt with them a few years ago and wasn't too...

First off I dont have a problem with my blower. Upon my search for small maintenance parts i keep seeing vac blowers advertised. Yes some may be upgrading I guess. But.... I'd love to know your experiences...maybe a stupid situation that happened. [emoji106]

Well I'll take all your advice into consideration. There isnt much selection in my area. Not like your guys. There in NO available cleaning units. A new Prochrm Apex diesel here is 35-36000 thousand Canadian. I can rebuild this and buy it for $14500 and it has 250hours. So I dont know. I have...

It doesnt look like there is much to do. Just make.sure those heat exchangers are good and didn't freeze or break.(you'll need to remove them and inspect) There is a good amount of common sense stuff before you need to open a manual. Just take your time. You shouldnt run the unit without water...

He told me he was looking to sell it as extraction unit only with cold pressure washer. He actually removed the heli coil. But he was not selling for carpet cleaning. He recommended it to me because I asked about a diesel unit.

I'd like to just get the heat exchangers one by one and not drop all that money on heat exchangers at once. I called prochem and they say I'll get 180f with just heli coil. Do you think that 8300 USA currency a good deal for that?

Sorry if I wasn't clear. The unit will cost me 11k Canadian which is equivalent to $8300 USA money. Then it will need the 2 stainless HX and the copper HX. It's the diesel Apex and has 250hr. I should be letting the guy know tomorrow as he has indicated he was going to advertise it. That's...

So thanks for the input. Just to clarify that is like 8300 USA dollars. Yours saying that is too much? It's being sold at a reputable dealer.

I checked the prices. They are not cheap. I'd say all 3 would be $2500 US coin which is like a million or so dollars in Canadian. Lol which is ok I just dont even know if it's a good deal(the apex) to start from. Why do you ask if I can find the parts? Is it hard to get parts to this unit...

This is my first post but I have been quietly observing all of your posts for some time now. (BTW Some of your posts make me laugh) I have a question and I have run it across people around me but it's a small industry in my area. I have been a carpet cleaner for 21 years this May 24th. I am...