Search results

  1. S

    Enquiry about Meth lab & forensic cleaning courses.

    Thank you Sir I will Google them up and see how I go... Thank you again. Sent from my SM-N910G using TMF Forums mobile app
  2. S

    Enquiry about Meth lab & forensic cleaning courses.

    Mate what other related courses you would recommend to complete with the meth lab cleaning? Thank you Scott. Much appreciated Sent from my SM-N910G using TMF Forums mobile app
  3. S

    Enquiry about Meth lab & forensic cleaning courses.

    The only meth head here must be ur fudget paranoid head mate... Sent from my SM-N910G using TMF Forums mobile app
  4. S

    Enquiry about Meth lab & forensic cleaning courses.

    Thanks mate I will. Sent from my SM-N910G using TMF Forums mobile app
  5. S

    Enquiry about Meth lab & forensic cleaning courses.

    Hi all, Hope all you people are doing well.. Not sure if this is the right forum to post this at. Seeking advice and guidance where would be the best place to complete meth lab and forensic cleaning courses in the United States? I from Australia. Thank you all. Sam. Sent from my...
  6. S

    Prochem blazer xl oil switch help.

    Thanks for the reply buddy, the problem was the ignition switch and the relay switch... All fixed now. Thank God. Sent from my SM-N910G using TMF Forums mobile app
  7. S

    Prochem blazer xl oil switch help.

    Hi all, I have took my machine to the local lawn mower repair guy. He calls me later on saying that when he takes the wire off the oil switch and earth it the machine will run but he can't turn it off with the ignition switch and as soon as he puts the wire back to the oil switch the machine...
  8. S

    Prochem Blazer Xl not starting.

    Guys which one of these is the kill lug that I would need to discount to determine if this problem is electrical or engine related Sent from my SM-N910G using TMF Forums mobile app
  9. S

    Prochem Blazer Xl not starting.

    Yes mate Sent from my SM-N910G using TMF Forums mobile app
  10. S

    Prochem Blazer Xl not starting.

    Yes mate battery checked and was at 12.5 Sent from my SM-N910G using TMF Forums mobile app
  11. S

    Prochem Blazer Xl not starting.

    Actually I have not disconnect the kill lug thank you for reminding me about the and to Seagrtj who mentioned it at #4. I will try and locate it near the fan and do that before going further. Yes the problem we have in Australia the truckmount repairs shop are outrageously expensive and there...
  12. S

    Prochem Blazer Xl not starting.

    I would like to thank you all for taking the time to reply to my. I have checked the fuel pump and did discount the wiring float switch terminal and create an electrical circuit and the machine still didn't work. Also tapped on the starter while cranking and still no luck. Any other...
  13. S

    570ss liquid cooled pressure gauge problem help.

    Hi all, This post is for a friend of mine who is having problems with his machine. Basically when the machine is in use the pressure gauge seems to go up and down. I will be attaching a video of the problem. Much appreciated all the help. Thank you. Sent from my SM-N910G using TMF...
  14. S

    Prochem Blazer Xl not starting.

    Thanks mate.. I have changed the plugs , checked battery and slightly topped the oil level... Problem still there. Does any one can advice me how to check the waste tank float switch and determine if it's faulty or not or is there a way to isolate it and start the machine to determine if...
  15. S

    Prochem Blazer Xl not starting.

    Hi all, My prochem machine have around 1000hrs on, have used it yesterday with no problems. Today at my first job tried to start the machine but it is turning but not running, when having my hand on the ignition switch on run I can hear the petrol pump and see the petrol going through the...
  16. S

    Prochem Blazer xl blower and cat pump maintenance.. help.

    Hi all, Any advice and recommendation on maintenance and the correct amount of oil in each? Thanks all much appreciated. Sam.
  17. S

    Prochem Blazer Xl heat and vacuum loss... Help please.

    My apologise for my late response. Thank you everyone for your advice and help. After checking what what mentioned above, I decided to take the machine to a local lawn mower shop, who is a dealer for bridges and starter engines. After he checked the engine, I was advised there was no sparks...
  18. S

    Prochem Blazer Xl heat and vacuum loss... Help please.

    I have applied pressure on the spring some air was released but the spring didn't move much at all and the machine is still hissing before going off while the spring and stud still not moving
  19. S

    Prochem Blazer Xl heat and vacuum loss... Help please.

    I My friend in regards the blower I have manually applied pressure on the spring and there was air coming out..it didn't move much by the pressure applied should I gently tap it with a hammer? .The hissing noise is still coming out just before the engine turn off and the spring and stud still...
  20. S

    Prochem Blazer Xl heat and vacuum loss... Help please.

    No I haven't in the past 6months, I will do that now. Thank you.
  21. S

    Prochem Blazer Xl heat and vacuum loss... Help please.

    I followed what you suggested my friend and a loud hissing was heard before the engine turning off but the spring and stud did not move up and down at all, this is the spring and stud next to the blower correct? Also if you don't mind me asking how do I check my bypasses are not opening...
  22. S

    Prochem Blazer Xl heat and vacuum loss... Help please.

    The dump valve is all good, but the gasket in waste tank have some missing rubber in the middle part.
  23. S

    Prochem Blazer Xl heat and vacuum loss... Help please.

    Hi all, New guy here, I have a prochem blazer xl with nearly 1000hrs. The problem started a week ago with loss of vacuum and no heat when the machine is running. With the vacuum port's clear and machine on full throttle it's reads in the middle of 0 and 5hg With vacuum hose connected and...