Good morning to you all TMFers,
I’m looking for a used of course not abused, 2”
Swivel wand. I’m in Santa Barbara CA. Let me know if any one has one that wants to let it go for a reasonable price! Thanks,,
Good morning, I was wondering if you can give me some guidance Whether or not to buy A used hydramaster 875 with 3900 hours on it for $8000
I’ve used Prochem 405 and couple of blue lines for years, never owned hydramasters. I’ve been hurt buying used but reluctant to continue to do so, based on...
Thank you so much for such a detailed instruction
I did spray carb cleaner in and around it’s housing but no change in RPM, I used 2 bottles, also twisted air mixture screw up and down to see if any changes but not a whole lot.i have an old mechanic neighbor who works on small engines
Hello dear TMFers out there, I’ve been haggling with my main equipment the 405 shutting down on me, I have a feeling it’s related to the carburator. Strange is that when I pull my choke all the way out it stays on and keeps going.ive used cleaners but didn’t help much! Could it be the speed...
Does anyone out there have an extra Ecu for my blueline TWII vortec #38900438B ? That seems to be the problem. I borrowed one from another machine to see if that fixes the malfunction, and there it was, the answer to my problem! Thanks,,
Hi Jim, so,, here’s what happened I pulled out the in-line hose to the Throttlebody/MAF sensor
Opened the butterfly wing inside there just a little
and jammed a thin piece of toothpick to keep the wing open, then put the hose back on there, now I can run it in low speed for a long time...
Firstly I do appreciate your response, I talked with Scott over at sapphire and he suggested undoing the main wire to bypass all kill switches and I did.
The “mechanic” who claimed to be a specialist
Had the van for 2 weeks couldn’t figure it out!
I changed the MAF sensor but No go,,
I picked up a used blueline thermal wave 2 with a Vortech engine, I bought it as is hoping I could spend a few hundred bucks to get it started. But after spending money on mechanics and parts back in square 1, The machine runs for five seconds then shuts down, is there anyone out...