Search results

Just got a surprise in the mail from aloha , this guy is for real who does this, I never ever seen a manufacture ever give out so much equipment. I revived one Grand Reaper with pole (btw I love the new poles no sticker on the pole just printing.) one shark brush, one Dirty Grout Demon, mini...

I did it, came out great. it was at my own house, it is brown marble countertop in the mast bath, it was real bad. I used stone scrub with a fiber pad to remove the soap, then I put on a diamond pad very fine than I used a polish compound that I bought at a supply place, then I used a stone...

I been running to this often, can't clean them. is there a special way of doing it, need to restore the glass and frame. any help would be appetitive.

I have a tile job on the 5th floor of a condo. is this too high to run a hose to the tm.

I was thing of trying home advisor, does this work for carpet and tile cleaning leads. or it just for contractor.

My son turn the pump up to 3000 psi and blew the coil. I need one order today. would like the xp coils I have a 3HT hp and want to upgrade it to XP I called les Judson and he does not have one is there any body else. thank vito

My EZ 25/45 broke down yesterday, just as I was finish a job had 10 strokes of the wand and I would of been done. this is the first time in 600 hrs it let me down. the elec fuel pump stop working. so I took my mixing bucket and borrow some gas from a law mat guy, disconnect the hose and stuck it...

well this is the second time she went down on me. micro switch went out. at least it did not cost much this time. thank god I stock extra parts in the shop now. I had to used the rv360 to scrub and rinse the carpet. I been using the wand and the crb and though I was doing good. I done this job...

took this job with a wool rug that has moth worm on it, I scrub with crb then put down wool cleaner, steam it out, after it dry spray some bug killer on it. still has problem. what can I do to kill these things.

love this stuff, what can I replace it with that is just a good. I am look for the very best oriental rug prespary, I don't care what it cost. I will miss it. ss sucks.

I FOR THE LIFE OF ME CAN NOT FIND THE SHARK BRUSH FROM INTERLINK SUPPLY, DO THEY CARRY IT OR NOT. PLEASE SUPPLY LINK SO I CAN BUY A COUPLE OF THEM.

Well I final getting problem with my CRB, three weeks ago I had smoke coming out of her. down big time, found out after taking apart, the run and start capacitor, fuse breaker micro switch min switch needed all replacing, work great start up without hesitation. work for about two weeks and one...

Just got a email from Donald from steambrite, he just release the new goliath and let me tell you it not a joke. it has 4 Ametek Lamb 6.6 vac Motor it has 340 CFM WITH 215 INCH OF LIFT. 73,000 VACUUM UNITS. 50AMP MACH. FOUR CORDS WHICH THREE WILL RUN ON A 15AMP AND ONE ON A 20AMP. DriStorm...

Hydro-Force 2" Flash Cuff look to be a high quality cuff. I do not trust mytee cuff. are they any good. or should I go for the flash cuff. I like the swirl joint and push button. and they claim the inside dia is the same as the hose. where mytee has a lot of quality control issue.

WOW What a nice wand. came from the factory with a bypass and I had them increases the jets size to 5x8015. I thought that I would have to dial in the jets angle and depth. I was wrongs, it was tune in already from the factor. wow. the build quality is thru the roof. thank god I did not buy the...

This tile job was bad one, it wall all black and even under the beds and couches were black 1600 sq ft of nasty tile. here are some pic. customer send pic of job she was blow away. I used tile master and then scrub with CRB then used the tile spinner.

Here are some pic of the latest redid to make thing faster for me.

my Sister need a carpet cleaner in downriver Mich. must have a rotovac and truckmount. that came from here. she see what I can do, so that what she wants. cbr is also a plus. please contact me so I can pass on the phone number to her.

AHOLA DAVE send me a pole for my demon and shark brush. This has got to be one of the best pole ever made. I am blown away. If you don't have one too bad brother. It is so light and it has rubber handle half way down the pole and a another handle on the end. it is stunning to say the least. I...

been block and flag and I don't known why. I even made a new email acct. but no good I am still block and flag. does any body known how this works. thank vito

I was approached by BNI to join it was 150.00 for a app fee and 525.00 a year dues, and if you missed 3 meeting you were kick out. they say they can grown your buss by referral . I don't see it to be that big of a benefit. it would take a lot of jobs to make up all that money and the meeting are...

I was wonder what the different between the two and is it a stiff brush or is it soft like the one that everybody buys. I have two right now one is real soft and the other is stiff. where do these fall at. stiff or soft or in between. like to buy one soon. has anybody used any of these brush...

I had two of them in a row at two different location. no hose bid at the building so i had to used my water tank, first time that i had to used them. it was only two bedroom rooms so the 50 gal of water just made it. i took some Para cord hung it over the railing and tie the hoses to it and...

This is just for infor on little Giants 3HT HP gas usage. with the goliath and it so called heat exchanger. I would get 18 hrs on 9.2 gal of gas. (40 lb tank.) at 220-230 deg water temp now with the EZ 25/45 TM using the HX to pre heat the water going into the LG on a 9.2gal Propane Tank which...

WHOA I done many jobs with the goliath and the LG. this job would of took me 4 hours to do with the goliath and the pumptech 356u high pressure pump. with my new set up I was pulling out the driveway in 1.5 hrs. and the lady gave me a big Hugh. (no tip sucks) the tile was 30 year old and never...