Recent content by Vacuum Thingymajigger

  1. Vacuum Thingymajigger

    Mytee LX Vac Motors

    If a 1.5 HP water otter, pressure fed, can work with a high performance vac motor, then probably a 0.5 HP Pumptec pump, also pressure fed, can work with the LX vac motor at 15 amp. But if pressure fed, how do you inject the acid rinse?
  2. Vacuum Thingymajigger

    Mytee LX Vac Motors

    This may not be too bad as these are one of those lighter models. Try moving those newer dryers on a pedestal and it will not budge. So what do you do, call the homeowner to help you? Once it is moved back, you now have to use a ladder to go to the back to access the plug. So what Mytee or...
  3. Vacuum Thingymajigger

    Mytee LX Vac Motors

    Is 12A the running amps with hoses and wand attached? If it is lower then, there may still be room for the pump. If not, then it will not work. Hunter box can be used to hunt for the separate circuits. 1 plugged into the porch outlet and then just search for the other one inside.
  4. Vacuum Thingymajigger

    Mytee LX Vac Motors

    If you are really making money out there, you won’t have time to tinker with stuff. That’s why I’m challenging the manufacturer to make it happen for me. That’s the reason I buy the machine from them. I want a finished product that I don’t have to tinker with. I presented my problems that I...
  5. Vacuum Thingymajigger

    Mytee LX Vac Motors

    Hey that’s quite harsh man! You don’t sound like an adult to me.
  6. Vacuum Thingymajigger

    Mytee LX Vac Motors

    I have a Prochem Legend right now and using a generator defeats the purpose of going electric. Gas prices are soaring and I want to save some money. I have an old Speedster. The 1/3hp motor with Pumptec can cope up with 4 flow but not the 7.5 flow of the Zipper. I believe the 375 CAT pump...
  7. Vacuum Thingymajigger

    Mytee LX Vac Motors

    All houses have separate lines that will create 230v but not all houses here have 20A. Not all houses have kitchen outlets that are 20A. You also don't want to go to the basement all the time just to look at the breaker box for 20A circuits.
  8. Vacuum Thingymajigger

    Mytee LX Vac Motors

    Sorry but I don't have the time and resources to experiment this on my own. I'm sure if this machine is available, there would be a lot of interest on it and you will be able to recoup your expenses easily.
  9. Vacuum Thingymajigger

    Mytee LX Vac Motors

    Ok, I get it. Either it will not work or you are not interested in serving the customers who want an electric machine that looks like a truckmount, will operate like a truckmount and only need two 115v, 15 amp circuits. I will have to wait for someone who does. It might not happen but who...
  10. Vacuum Thingymajigger

    Mytee LX Vac Motors

    Hahaha...I hope @John LaBarbera didn’t delegate this account to one of his clerk. That was a dumb answer. I want a simple YES or NO. The question is: Can the Escape be made to run on two 15 amp circuits using 230v, 1/2 hp motor for the water pump? 1st cord will power half the motor and 1 lx...
  11. Vacuum Thingymajigger

    Mytee LX Vac Motors

    I had given up on the idea of using 2 parallel Aquatec pumps since on their catalog, pressure output if suction fed is only 90psi. If I use 125 ft of hose with that, then that pressure will be too low to provide adequate agitation. I don't want to use my Oreck all the time so I need 400 psi...
  12. Vacuum Thingymajigger

    Tripping breakers :(

    Do you have a replacement 25A breaker for the 20A that currently come with the converter? The 20A breaker trips if I turn on the heater. E779 -breaker, circuit, 20A w/ retaining nut
  13. Vacuum Thingymajigger

    Mytee LX Vac Motors

    Cord length doesn't matter to me because I'm planning on using this retractable cord reel. https://www.reelcraft.com/catalog/product_search.aspx?search=L%2070100%20123%203A&category=cord-power But the machine needs to operate on two 15 amp circuits. Would Mytee @John LaBarbera explore with...