Larry Cobb | TruckMount Forums #1 Carpet Cleaning Forums

Larry Cobb
Reaction score
200

Joined
Last seen

Profile posts Latest activity Postings About

  • Hi Larry. I ordered two LMB59 gaskets on Tuesday from your company. I got a notice today (Friday night) that it was not shipped yet and will ship Monday with a Wednesday delivery scheduled. Thanks for the fast service. I really needed them for Monday and never thought it would take so long.
    Hello Larry! I am very interested in the pump upgrade. Please when available reach out to me so i can fully understand the method and i will purchase ASAP!
    Hey larry I have a Sandia Sniper 3-500-H and if I were to upgrade to two LMB2A motors would they be drop in's or would it require mods?
    Hi larry, I was planning on building an ETM using 4 vacuum motors. They are rated at 105 cfm each with 130" water lift they are 10amp motors. If I have two stacks with 2 in series on each stack how many CFM and Water Lift would i get? Also how many chords do you think i could get away with on this setup, how many minimum.
    Hi Larry,

    I am VERY interested in the laser/uv assisted stain removal technology that you supply. Would you mind send me and email so that I can discuss this further with you. I don't know anybody doing this in Australia.

    Thanks, Phil - info@mightyclean.com.au
    Hey Larry I called you yesterday and talked about some vac motors. My next question would be about making a etm with 4 lmb5a in series parallel setup. I was wondering how this would work out and I amlooking to use a 1200 psi pump. Any help would help me out thank you
    Good evening Larry I am new here and everyone so far says you the man to see about vac motors. I am looking for 2 3stage motors. I am going run a 500 to 800 psi pump and 50' of 2" hose with a 12" wand.
    So any suggestion would be great Thank you in advance
    larry icalled to order 400 ft roll of that hose the guy i talked to said he would call me back but i dint here back from him if u would call me i will buy that 400 ft role for 388 dallors that un have on your web site thanks mike thompson 507 273 3685
    larry icalled to order 400 ft roll of that hose the guy i talked to said he would call me back but i dint here back from him if u would call me i will buy that 400 ft role for 388 dallors that un have on your web site thanks mike thompson 507 273 3685
    Larry I went to order the tips you suggested but little confused with the website with how to order the specific size my number is 712 541 2669 Thanks Matt Arndt On the Spot Carpet Cleaning
    Hi Tim;

    The "GN22S Gun Assy" can be used for cleaning your waste tank.

    It was designed for "no touch" cleaning of bathrooms with a portable extractor.

    A "cleaner-sanitizer" is presprayed on all the surfaces in a bathroom at low pressure.

    After 5 min. or so of dwell time, all the surfaces are rinsed at high pressure.

    It drains thru a floor drain or is vac up.

    Larry
    Hey Larry, I saw this "GN22S Gun Assy, 8''wand-1504 Jet, BH2-61" on your site, what is this used for? would it be good for spraying out a waste tank?
    Larry I will be ordering that M5+ in 2 weeks, just liked we talked about today on the landline, does it come with the longer better filter?
    Larry ;
    My vacuum motor went out in my - US Products 300H Portable Extractor. It 300 & 75 psi, two cords one for heat and another for the pump and the vacuum. I was looking at your website,and there is one that looks like it at least the mounting kit but the one I have has 3 bolt mounts. LMB011 on your website, the way it is set up on the website is how the motor is set up in the US Product. I don't know if your familiar with the US Products. If you are that is even better so you would at least know what I would need to replace it with. My question is what can I use to replace it with.? I am not sure how many amps the pump takes but to have a pump and a vacuum on one cord can't be to much for both. I would like to keep it like it is, it's hard to find a single 20amp by it's self. Would appreciate any help in this matter. I called Jon Don they told me I would have to use the same type motor . Thank you in advance for your assistance.
  • Loading…
  • Loading…
  • Loading…