Recent content by Justin Legend Brands

  1. J

    Bigger engine possible on Blazer XL

    The XL units (Blazer XL, and Legend XL) had the same frame. Since they had the same frame you could put the different motors in them. You will want to put the same pulley size that is on the blazer on it as that determines how fast the blower and pump spins, and you don't want to over rev them...
  2. J

    Prochem Everest question

    Of course. Happy to help!! Absolutely! My cell is 253-651-3468. The office is 800-932-3030 and I am at ext. 4819.
  3. J

    Prochem Everest question

    Sorry, I forgot to mention you will need a new pressure gauge as the low pressure model has a 1200 PSI gauge while the high pressure model uses a 3000 PSI gauge. 122102 PNL, LOWER FRONT, HP 107763 LABEL, LOWER FRONT HP 106837 GAUGE, 0-3000 PSI 112858 PMP, CHEM, PULSE, GP, HP *or* 113569 PUMP...
  4. J

    Prochem Everest question

    There was not a kit to to change it from LP to HP. You would need a new chemical pump (you need to be able to shut it off, or use the piston style that is on the EV870 as high pressure will blow a hole in the diaphragm), you will need a second pressure regulator, the valve, the quick connect...
  5. J

    Prochem, Heater Core

    Happy to help!!
  6. J

    Prochem, Heater Core

    Present! The rubber gasket just sits there. It is narrower than the bottom of the heat exchangers, so that is what holds them in place.
  7. J

    Legend se drops pressure

    Descale and check all of you QD's
  8. J

    Loosing pressure on 370 ss

    I am glad you were able to get a kit. The bypass hose is short as you are supposed to move the valve to the other left side (if you are looking at the back of the machine) of the thermal well, so the hose goes straight up to the top of the thermal well where it draws the water from instead of...
  9. J

    Loosing pressure on 370 ss

    The steam relief valve is no longer needed. Which distributors have you reached out to, and I will call them? Or you can give them my cell, 253-651-3468, and I would be happy to chat with them about it. All of our distributors have access to it, and I am sorry, but we can not sell it to you...
  10. J

    Loosing pressure on 370 ss

    We actually went with a new style thermal relief valve that eliminates the need for this. 117832 KIT, THERMAL VALVE RETROFIT. This can be used on any machine manufactured after July 2012.
  11. J

    SS570

    https://www.legendbrandscleaning.com/Dealer-Search/SapphireScientific
  12. J

    water pressure

    Have you verified that they are putting out the proper flow?
  13. J

    water pressure

    Are you using on board water, or are you using customer water?
  14. J

    Specials Truckmount will not stay running when we flip ON the pump switch??

    Yes if it pops the breaker, then there is a short somewhere in the wiring.
  15. J

    water pressure

    @Dizzle Dazzle @john P.