Recent content by johnny916

  1. johnny916

    What chemicals will disinfect for Corona virus?

    I know what CDC recommends but is there anything more powerful from the carpet cleaning stores? Speaking more for hard surfaces.
  2. johnny916

    BOXXER 421 CHEMICAL FEED TOO MUCH SUCTION FROM SOAP JUG

    Ok after fiddling with it, I finally got everything to work to satisfaction. I have to turn the chemical metering valve all the way counter clock wise just to get 3.5 GPH but that's good enough for me.
  3. johnny916

    BOXXER 421 CHEMICAL FEED TOO MUCH SUCTION FROM SOAP JUG

    Ok I did that and now I am getting the pump to prime now thanks! But now I am getting no chemical. When I switch the knob from prime to on, I have no chemical suction still.
  4. johnny916

    BOXXER 421 CHEMICAL FEED TOO MUCH SUCTION FROM SOAP JUG

    Which hose(s) are you referring to stick inside my vacuum port?
  5. johnny916

    BOXXER 421 CHEMICAL FEED TOO MUCH SUCTION FROM SOAP JUG

    HELP.. I changed the diaphragm which was in horrible condition, it had a hole in it and was falling apart!! I thought wow this has to be the problem!! Well it was the suction problem! But now I am getting NO suction from my chemical jug at all!!!!!!!!!!!!!!!!!!!?? No matter if I turn the...
  6. johnny916

    BOXXER 421 CHEMICAL FEED TOO MUCH SUCTION FROM SOAP JUG

    The diaphragm is only $15 so I think I'll just try that one first unless you guys know of a way to check which one could be the culprit.
  7. johnny916

    BOXXER 421 CHEMICAL FEED TOO MUCH SUCTION FROM SOAP JUG

    I have the old style, it's brass, so do you guys think I should even bother checking the diaphragm then? How would you know it's the chemical check valve and not the diaphragm?
  8. johnny916

    BOXXER 421 CHEMICAL FEED TOO MUCH SUCTION FROM SOAP JUG

    UPDATE: As soon as I turn my machine on I can see the chemical jug emptying slowly without me even using the wand!? So it must be getting sucked out either through the diaphragm or check valve.
  9. johnny916

    BOXXER 421 CHEMICAL FEED TOO MUCH SUCTION FROM SOAP JUG

    how do I check and replace the diaphragm ?? I will try that first.
  10. johnny916

    BOXXER 421 CHEMICAL FEED TOO MUCH SUCTION FROM SOAP JUG

    Hello guys, I have a problem with my 2012 Boxxer 421 chemical feed. The problem is it's sucking too much detergent rinse from my soap jug, I'll clean just one car with my upholstery tool (trigger fixed to the on position), and the entire jug will end up empty!? I replaced the 3 way valve and...
  11. johnny916

    BEST WAND YOU CAN BUY FOR BOXXER 421?? 4 JET WAND?

    What's the best rotary tool out there? Is it the 360i or the T-rex? Or what? Mostly for residential.
  12. johnny916

    BEST WAND YOU CAN BUY FOR BOXXER 421?? 4 JET WAND?

    Ok what about this wand: http://www.kleenpro.com/mach-12-titanium-carpet-cleaning-wand-pmf/