Recent content by John LaBarbera | TruckMount Forums #1 Carpet Cleaning Forums

Recent content by John LaBarbera

  1. John LaBarbera

    Best way to convert 5 jet (0.15/jet) Zipper to prevent clogging

    I would what lucky is doing. Go with 5 02s you could also add a strainer.
  2. John LaBarbera

    New Mytee Tank

    I doubt you’ll collapse the tank. Previously it was tested with a 45 blower with out a relief valve at 24” hg and after 20 minutes they turn the blower off for rear it would damage the blower. Some guys pump from their small Tm tank to these using as holding tanks.
  3. John LaBarbera

    New Mytee Tank

    https://www.mytee.com/products/tm-27-truckmount-tank/
  4. John LaBarbera

    New Mytee Tank

    The pictured tanks are approximately 54 gallons. There is also another that is a single cylinder that holds 27 gallons.
  5. John LaBarbera

    New Mytee Tank

    Comparing these tanks to a $30.00 tank is not even close to a fair comparison. You can’t buy the mounting breakers that come with the Mytee tanks for $30.00. Like comparing apples and oranges. These can be holding tanks or vacuum tanks. They are that strong.
  6. John LaBarbera

    Opinions on Mytee lite vortex

    The BZ105LX Auto has an additional feature, chemical injection.
  7. John LaBarbera

    New LX vac motor conversion kit

    Yes 7.2 and 8.4 are the same bolt pattern. Go to the LX motors. Change your plumbing to air series. You won’t believe the performance you will get.
  8. John LaBarbera

    New LX vac motor conversion kit

    That may be your preference but it depends on the motors. LX are best in series and can go to 200’. Maybe a little more.
  9. John LaBarbera

    New LX vac motor conversion kit

    Give it a rest Ed. 8.4 are too big (as I would think you know) to be a good choice for a booster or a porty. The 6.6 LX motors are perfect the way they are.
  10. John LaBarbera

    New LX vac motor conversion kit

    The LX in series will Out perform two 8.4s In series or parallel. Go with the LX.
  11. John LaBarbera

    Ninja Classic Upgrades

    I agree. And you’re pleased with your results. That’s good. Water lift sealed at the machine we have found does not necessarily translate to lift at the carpet that’s why I asked. Thanks for the information.
  12. John LaBarbera

    Ninja Classic Upgrades

    I think the two stage is restricting airflow.
  13. John LaBarbera

    Ninja Classic Upgrades

    Very good information. Do you feel that the standard 6.6 two stage is restricting the cfm of the LX motor?
  14. John LaBarbera

    Ninja Classic Upgrades

    Jim have you measured your water lift and cfm with that set up?