As for this holiday season all the cleaning service mechanics are off. I called my mechanic and he will look at it in the morning. Could it be maybe the belts are too tight? Where would I be able to get the vac gauge hose? Thank you.
I had my vacuum belts changed by my auto mechanic as I couldn’t get anyone in this holiday season.
The machine sounds louder now and vibrates a lot, specially when idling lower speed. Anyone have any suggestions what could be done.
Also this is another issues I’m having on the 570 SS...
Also, you probably have a short ,open end @ one end pressure hose, which you can hook up to your mount to release any air in the system. I would run it for a couple minutes so that there is no air pockets in your line. That could be the problem as well & luckily you have fixed the problem.
I would start with the regulator. You can probably get a kit from your supplier. Next would be chemical gage, making sure there’s no air in the lines & making sure your chemical pump is working well. Lastly, if it still pulsating, probably need to open up the pump.
I normally use a product called ‘winter rinse ‘
But this time, I thought maybe just clean with normal prespray and acid rinse should take care of it.
Although, most turned out good except a few stains have wicked up. Was thinking going back and just spray winter rinse and pad dry with rotary...