What steps are required to repair a solution hose?

Discussion in 'Ask Our Repairmen' started by johnny916, Nov 22, 2010.

  1. johnny916 Member

    Member Since:
    Sep 26, 2010
    Message Count:
    720
    Location:
    CA
    Ratings Received:
    +43 / 3 / -0
    Real Name:
    John A
    Business Location:
    United States
    Apparently one of my 1/4" hose is leaking somewhere near the connecting sections, there are quick connects attaching the section..

    Haven't tore the 5" protector off to find out but if I have to slice the hose what would I need to reattach it?
  2. Richard Baldwin Moderator

    Member Since:
    Sep 5, 2008
    Message Count:
    4,215
    Location:
    Ontario
    Ratings Received:
    +863 / 0 / -0
    Real Name:
    Richard Baldwin
    You need to find a hose and fittings place, you know, a place that repairs and sells anything from hydraulic hoses to pressure hoses like what you use. Take your hose in there, they will cut the end off and press a new end on to it. There is no way to repair it yourself. The good news is it shouldnt cost very much for them to do it and they will probly do it while you wait.
  3. Matt Strader Active Member

    Member Since:
    Feb 7, 2009
    Message Count:
    2,596
    Location:
    Jupiter, Fl
    Ratings Received:
    +245 / 0 / -0
    Real Name:
    Matthew Strader
    Business Location:
    United States
    use super glue
  4. Full Steam Ahead New Member

    Member Since:
    Oct 30, 2009
    Message Count:
    160
    Location:
    Omaha, NE
    Ratings Received:
    +31 / 0 / -0
    Real Name:
    Shaun Sailors
    Business Location:
    United States
    Ahh, superglue....I knew there as an easier way!!!
  5. brian3180 Member

    Member Since:
    Mar 7, 2010
    Message Count:
    403
    Location:
    Texas
    Ratings Received:
    +41 / 0 / -0
    Real Name:
    brian l
    Business Location:
    United States
    You will use too much super glue, I prefer Hot Glue.
  6. spotman123 Active Member

    Member Since:
    Jan 3, 2010
    Message Count:
    1,175
    Location:
    new york
    Ratings Received:
    +214 / 0 / -0
    Real Name:
    spot man
    Business Location:
    United States
    As richard b put it try a hydraulic place that repairs hoses. Try to find out exactly where it is leaking. They should be able to cut and crimp a new one on for you. Should not cost much. How old are the hoses?? Might look into replacing down the line if they are getting old to avoid the black death syndrome. I admit it did happen to me once, and that was all it took. spotman
  7. Frank DiGi Administrator

    Member Since:
    Sep 3, 2008
    Message Count:
    5,695
    Location:
    New Jersey
    Ratings Received:
    +906 / 0 / -0
    Real Name:
    Frank DiGiugno
    Business Location:
    United States
    I replace the hose could have problems later..
  8. 1ST CHOICE CLEANING Member

    Member Since:
    Mar 30, 2010
    Message Count:
    941
    Location:
    texas
    Ratings Received:
    +121 / 0 / -0
    Real Name:
    jason fisher
    Business Location:
    United States
    I agree 100% with this, I had a buddy of mine working for another company ask why they keep having to pair the same hose. Of course once it blows and starts leaking there is a good chance that it will do the same thing in another place.
  9. Gnu New Member

    Member Since:
    Nov 16, 2009
    Message Count:
    1,688
    Location:
    Onion Sniffing Country
    Ratings Received:
    +201 / 0 / -0
    Real Name:
    Ka Nacka Chu
    Business Location:
    United States
    just pony up the cash for a new hose. better fix it now or put up with tons of disappointed customers in the future. either through break downs, leaking onto their $4000 hardwood floors. their leather couch etc... Frank is absolutely right. you dont need to buy 500 feet fyi
  10. Davey Cracker New Member

    Member Since:
    Nov 6, 2009
    Message Count:
    595
    Location:
    LB, CAliforina
    Ratings Received:
    +39 / 0 / -0
    Real Name:
    Dave Trager
    Business Location:
    United States
    That's overkill, I use Elmer's!
  11. johnny916 Member

    Member Since:
    Sep 26, 2010
    Message Count:
    720
    Location:
    CA
    Ratings Received:
    +43 / 3 / -0
    Real Name:
    John A
    Business Location:
    United States
  12. johnny916 Member

    Member Since:
    Sep 26, 2010
    Message Count:
    720
    Location:
    CA
    Ratings Received:
    +43 / 3 / -0
    Real Name:
    John A
    Business Location:
    United States
    It doesn't seem that hard to attach to new end fittings, does anyone know what tools are required?
  13. Davey Cracker New Member

    Member Since:
    Nov 6, 2009
    Message Count:
    595
    Location:
    LB, CAliforina
    Ratings Received:
    +39 / 0 / -0
    Real Name:
    Dave Trager
    Business Location:
    United States
    No, it isn't hard if you have the right tools, hydraulic press and fittings for HP hose.
  14. ACC New Member

    Member Since:
    Feb 7, 2009
    Message Count:
    494
    Location:
    Tennessee
    Ratings Received:
    +89 / 0 / -0
    Real Name:
    Shawn Giroux
    Business Location:
    United States
    One word....Duct tape
  15. TimM Member

    Member Since:
    Sep 9, 2007
    Message Count:
    504
    Location:
    Northern Utah
    Ratings Received:
    +47 / 0 / -0
    Real Name:
    Tim
    Business Location:
    United States
    Johnny916, I have a local hose place here and I can buy hose (Good Year Neptune) from them for about $1 per foot, If you dont have the cash on hand to buy a new section, you can have them cut off the bad end and put a new end on it for less than $15 and it should only take them a matter of minutes to do that. I use GoodYear Neptunes and have not had any problems with them, Just be carefull if you have a live hose real it might shorten the life of the hose.
  16. wandwizard Active Member

    Member Since:
    Nov 12, 2008
    Message Count:
    1,537
    Location:
    Missouri
    Ratings Received:
    +408 / 0 / -0
    Real Name:
    Randy Dockins
    Business Location:
    United States
    I think it's over kill to replace a hose just because it springs a leak one time. Almost every hose I've ever had leak did it within an inch or two of the coupling. I take mine in to a place that repairs with some kind of special hydraulic machine that presses on a new fitting which is virtually impossible to do by hand. It normally cost me 10 bucks for a repair vs. over a hundred to replace the hose.
  17. groutguy Member

    Member Since:
    Mar 9, 2008
    Message Count:
    502
    Location:
    Fredericksburg Va
    Ratings Received:
    +170 / 0 / -0
    Real Name:
    Peter Diehl
    Business Location:
    United States
    I'm with replacing, I have had the black death occur to me. I usually replace the 50' length that is in the customers house every 6 mos or so with new and keep the older hose outside. I just hate the thought of cleaning a nice white sofa and blowing black crap all over it, not worth the risk of using old hose.
  18. Davey Cracker New Member

    Member Since:
    Nov 6, 2009
    Message Count:
    595
    Location:
    LB, CAliforina
    Ratings Received:
    +39 / 0 / -0
    Real Name:
    Dave Trager
    Business Location:
    United States
    That may be one word in Tennessee but not in most states. lool

Share This Page