ProChem Blazer Plus Does Not Pump water to wand

Discussion in 'Ask Our Repairmen' started by IowaHealthyHomes, Jun 20, 2011.

  1. IowaHealthyHomes New Member

    Member Since:
    Feb 13, 2011
    Message Count:
    18
    Location:
    Iowa
    Ratings Received:
    +1 / 0 / -0
    Real Name:
    Brad Hesseltine
    Business Location:
    United States
    I just purchased a used (1300 hrs) Pro Chem Blazer Plus. I've never owned a tm before, but the owner told me everything was working well when his father-in-law dropped it off for him to sell. He didnt know much, but was able to start it for us, and show that the vacs worked well. Started right up, but we had no hook ups for water where it was sitting in a storage unit.

    Now i have it at home, hooked up to water, but am not getting anything out the wand. The water tank fills, and water is going into the system put not registering a psi.

    HELP!

    Thanks!
    IowaHealthyHomes, Jun 20, 2011
    #1

  2. PortableMan Member

    Member Since:
    Dec 25, 2009
    Message Count:
    338
    Location:
    Georgia
    Ratings Received:
    +37 / 0 / -0
    Real Name:
    Alex E
    Business Location:
    United States
    Find a Local Truckmount repair place and let go thru your machine. The seller will always say its good like a car sale man,spend $60 to $100 and have it check out.Good luck man
    PortableMan, Jun 20, 2011
    #2

  3. Ara Klujian Moderator & TMF Repair Expert

    Member Since:
    Jun 19, 2008
    Message Count:
    2,644
    Location:
    Chicago, IL
    Ratings Received:
    +442 / 0 / -0
    Real Name:
    ARA KLUJIAN
    Business Location:
    United States
    Ara Klujian, Jun 21, 2011
    #3

  4. Joe Sabo New Member

    Member Since:
    Oct 8, 2010
    Message Count:
    268
    Location:
    Nashville, Tennessee, United States ky. Al. Ga. Ms
    Ratings Received:
    +62 / 0 / -0
    Real Name:
    Joe Sabo
    unfortunately, sitting for long periods is very bad for the unit. When the water completely leaves the system, the sills can stick to the plungers or cylinders in pumps, the rubber can dry out, and some parts will either rust or , stick with mineral deposits left behind. It can be anything from a pump needing rebuilt, to your regulator sticking, or leaks.
    Joe Sabo, Jun 21, 2011
    #4

Share This Page

Users found this page by searching for:

  1. prochem blazer manual