Hi I have a 200 psi ninja with a pumptec pump @ 2GPM max and 2 2 stage vacs with heat. i am using an S bend dual jet wand with two 110015 jets, i was wondering if these jets were the right ones for the pump? and if so and i wanted to use jets with a higher GPM flow rate without sacrificing psi so i can have better cleaning power with a bit more water on the carpet without overwetting what jets can I buy? Any help would be great thanks so much Bruce.......
If your Pumptec is a 114V then your (2 X 015) jetting is correct (03 total). If you have a 114T then you can go up to 04 total (2 X 02). If you use larger jets than this your pressure will suffer.
Also be sure to replace jets on a regular schedule. When jets become worn, the opening enlarges. The larger size can result in a drop in water pressure as well as uneven spray. If you are using the tools every day, figure on replacing brass jets in 3 to 4 months and stainless jets in 6 months to a year.
