Hydramaster 318 not starting. :/

Discussion in 'Ask Our Repairmen' started by Jason Esquivel, Apr 14, 2011.

  1. Jason Esquivel Member

    Member Since:
    Mar 31, 2010
    Message Count:
    166
    Location:
    West Palm Beach, Florida, United States
    Ratings Received:
    +27 / 0 / -0
    Real Name:
    Jason Esquivel
    Business Location:
    United States
    I haven't used my equipment for about two weeks now. I book a job for my neighbor and my mount isn't staring. I have half a tank of gas in the van, full fresh water, empty dump. It turns over and over but does not do anything. I took the air filter off and saw it adding fuel. I'm letting breathe now in the open. Maybe I flooded it or something? I only have 200.02 hours. I took the side panels off and checked the wiring. Everything was tight. Any thoughts? Thanks.
  2. Jason Esquivel Member

    Member Since:
    Mar 31, 2010
    Message Count:
    166
    Location:
    West Palm Beach, Florida, United States
    Ratings Received:
    +27 / 0 / -0
    Real Name:
    Jason Esquivel
    Business Location:
    United States
    I'm an idiot. (Must be from working with Matt Strader all night) The dump float was stuck in the upright position. By cranking and cranking I fouled out the plugs. Ran into Napa for some new ones, swapped them out now it's running like it should. I swear I checked that float first. That'll never happen again..

Share This Page