Can I Use My Existing Supplies on a Residential Garage Floor & Driveway?

Discussion in 'Ask Our Chemist!' started by Owner FOSC, Aug 27, 2010.

  1. Owner FOSC New Member

    Member Since:
    Jul 26, 2010
    Message Count:
    68
    Location:
    Arizona
    Ratings Received:
    +5 / 0 / -0
    Real Name:
    Greg McElfish
    Business Location:
    United States
    I'll be doing a proposal today that will include a garage floor where some transmission fluid leaked, and that has all the other typical types of grease and oil. I haven't done much of this kind of work yet.

    I do have a supply of Hydramaster Soil Break. Is this suitable? I'd love to use what I have on hand. If the Soil Break isn't suited to this application, is there something I can get at Home Depot? That's the closest source we have where we live that's open on the weekend.

    I just viewed the video in this post:
    http://www.truckmountforums.com/hard-surface-care/14052-10k-sq-ft-of-concrete.html

    My method would be pretty much the same.

    Thanks.
  2. b18cyacrx New Member

    Member Since:
    Apr 7, 2009
    Message Count:
    734
    Location:
    PA
    Ratings Received:
    +65 / 0 / -0
    Real Name:
    Chad Smith
    Business Location:
    United States
    I help a buddy sometimes with his Concrete Company and asked him about cleaning the concrete. He said to use Muractic acid mixed with water 1:1. Then dry it good and reseal.
  3. Scott W Preferred Vendor

    Member Since:
    Feb 14, 2006
    Message Count:
    6,892
    Location:
    West Jordan, UT
    Ratings Received:
    +1,884 / 0 / -0
    Most prespray are OK at degreasing concrete. Something designed for concrete would probably work better, but the Soil Break you have will work OK.

    A lot fo the result will depend upon the surface of the conrete. Some is much more porous than other. If the stain is deep in the concrete, it obviously will be much harder to remove no matter what cleaning agent you use.

    Acid cleaners work by removing a thin top layer of the concrete. This may be alright if you want a rough surface, but it can mess up slick finished concrete. I would stick with the alkaline degreasers.
  4. b18cyacrx New Member

    Member Since:
    Apr 7, 2009
    Message Count:
    734
    Location:
    PA
    Ratings Received:
    +65 / 0 / -0
    Real Name:
    Chad Smith
    Business Location:
    United States
    I asked about the etching like you stated and he said thats why you dilute it. He really knows his $h!+ when it comes to concrete, so I'm trying it in my shed floor here soon.
  5. Steve Toburen Strategies for Success

    Member Since:
    Jul 15, 2008
    Message Count:
    1,437
    Location:
    Santiago, Dominican Republic
    Ratings Received:
    +442 / 0 / -0
    Real Name:
    Steve Toburen
    Business Location:
    Dominican Republic
    My guess is if you didn't follow Scotty's advice you have a nicely etched shed floor. Stick with the alkaline cleaners and make up the rest of your cleaning equation with heat and agitation. Do you have a spinner?

    Steve
    www.SFS.JonDon.com

    PS Big Billy Yeadon isn't as young and handsome as Scott but in this short video he shows exactly how to clean a heavily stained garage floor and without acids.

    http://sfs.jondon.com/6163/resource...its-by-renovating-your-customers-garage-floor

Share This Page