Is this difficult? . How do I install it? Do I need anything other than the wrap? like resin or special sauce? lol

Air pumps for catalytic Heat exchangers. Air pumps are absolutely nessesary because the driven air blows across the coils to heat the catalytic...

Waste tank is not shutting off when full. What could cause this?

What do you think an AW29 is worth in used descent condition. How much are they brand new also?

Hi everyone I am from the uk and looking for some help, We have been having problems with a hydramaster 318 boxer Its blowing oil up the breather...

i forgot when i changed my blower oil last but i did put roots dresser Synthetic oil in it maybe year and a half how many hrs can you go with synt...

What jets do you use on your wand and why. Include number of jets (2,4,....). Curious who has done their own testing or research. OR are you using...

I bought a kero filter about 5 or six years ago from Crown. It came with a spare filter and o ring set. I think now the filter needs to changed...

As you may know I am probably purchasing the new El Diablo in the next 4 months. I have seen some post recently that said they did not like the Honda...

Guys I just got a call from a guy who demands the UV light before I give him an estimate. Don't have one and I needed to buy one anyway so tell me...

Whats your favorite air cooled engine? Briggs & Stratton, Kohler, Honda, Onan, Wisconsin

:hi:Do you think oil coolers are useful on air cooled engines? Or do you see them as unnecessary and do nothing as far as cooling is concerned?

What type of Oil will you use on a Blower? Where do you get the best price?

:hi:Sometimes its good to inspect the ceramic plungers on a plunger pump. Especially if your changing the seals. Worn plungers will exhibit what is...

Anyone know what off the shelf oil at a local auto parts store is comparable to cat pump oil?

I bought a new drill on ebay and it was suppose to be brand new. I am sending it back because its damaged. The chuck is beatup also. Thats a crack in...

I hope this can help / I have a Rotovac Power Wand it started to have a leak from the Rotary Union part #R-037 so I called to see how much for...

i bought a used electric multisprayer hadnt used it but tested it out at home went to a job started to use it and it cloged up so put it down today...

Do you see this happen very often? Vac hose collapsing from the vacuum pressure on the truckmount, right at the source. This has happened to me...

I've been looking for this Glossy Fuel Line that I heard about. It is suppose to be more resiliant to cracks and wear than the normal flat black...

I keep saying I need to carry water but I hasn't happened yet. Last week I pulled into a large apt. complex I clean and there was a bagillion cars....

Apart from carpet cleaning stores anyone know wear I can find a plunger to fit my K valve They all seam to want to charge stupid money for a bit of...

I read alot of Kohlers left the factory without the oil sentry hooked up. Seriously, this is a concern to look into. Most flags where not connected.

Do any of you guys use a kerosene heating unit and if you do how do you store the fuel for it. My new unit will be in a box van and I'm trying to...

I have revamped my wand yet again thanks to finally getting my hands on some new hardware. Feast your eyes upon the ultimate prochem quadjet wand of...

Hi I need a cuff for my vacuum hose Not the joiner that joins each hose together but the cuff that fits on the end of the hose and conects to the...

How many of you are using one of these? And is there a special type for a CC to use, or are they all the same? Will it work on carpet and hard...

Actually my tips are. I know there was a thread a while back about leaky tips but I can't find it. Up until today I was having occasional leaks. They...

I'm looking for glides for a rotovac 360. I did a search but found message boards and articles. Thanks in advance for pointing me in the right...

Sometimes just changing a no-drip screen is not enough. Although a valve stem or pin in the valve may seem good. Changing out the pin or stem is...

Hello, Two days ago I purchased a Hydracat crossfire 4.4 water cooled unit. I am rewiring and doing a general restoration. To start I need a good...

A hardware alert for you to watch out for; Galvanized Stainless steel lines used in construction of your machines may prematurily fail. Solution...

Today I was at the hardware store looking for a 2 1/2 inch plug for a vacuum inlet on my recovery tank. So I asked the man working at the store if...

Stant makes the best cooling pressure tester. Ithink I had to special order my adatpter for the nissan A12.