Thanks for everyone's replies. I would like to clarify that there was nothing wrong with the Chem Tex machine. It turned out the water pressure...

i have an old prochem bruin with a broken heat exchange and prochem no longer makes them. i need to find options quickly. will be having it taken...

I am new to truckmounts. I have use portables for 6 years and just got an El Diablo. The last two days its engine has lost power. At first it...

I'm tellin ya when I was born they broke the mold! I was cleaning today and putting up with the usual hassles of not getting a good seal from the...

Hello, I know this is a dumb question, but what can I do with my truck mount during winter? I do not have a heated garage, nor my truck will fit in...

Ok, I bought a Prochem 405 with 2800 hours from a customer who bought a new El Diablo. The problem is that it needs a cylinder head and the parts...

Hey . . . I'm new. I'm seeking sound advice. I'm bombarded with info and don't know how to sort thru it. :confused:I'm shopping a used TM and found...

What is the best thing to do to prevent recovery tank from pitting?

Recently my White Magic Triton LS truck mount that has a 60 hp fuel injected engine has been running rough when I first start it. It used to start...

I need 3 gauges for my Performer 405. All 3 died. Temperature gauge,psi and vacuum gauge. :mad: Where can I get these? Rob ...

During the slow season (Feb 1st-Mar 31st) I always do a lot of yearly maintenance, rebuilding, sanding, repainting and updating. Here are a few...

Cat pump, Giant, Hypro etc...?

Its winter time and I need to put anti freeze in the pump to stop it freezing I have a bottle of anti freeze ready mix Dose anyone know the...

I have some questions about this and Hydramaster has BEEN ABSOLUTELY NO HELP!!!!! It's going into a 99 Chevy and I need to know: 1. Does the AC...

Where should a propane tank be mounted on a van? Where to purchase a belly mount propane tank? How to safely install a propane tank.

1: I clean out the recovery tank just about everytime I use the machine..but everytime I crank the machine up, it lets out a big stink...I am glad...

This morning one of my techs said when he got to a job the machine would not start. Just clicked, but would not turn over. He jump started it and he...

that long filter bag fell off...it looks like there is a piece of rubber inside the cloth bag. it wasnt just the bag that fell off, the entire rubber...

High pressure pump dose not seem to be giving out any pressure or make any differance when I rev machine up Have a look at the video ...

Anyone know where I can find this motor? I am sure it is not unique to this industry. It is for an electric vacuum hose reel. It burnt out last week...

I was wondering what would be the best layout for a prochem apex ,100 gal fresh water ,100 gal waste ,300' hose reel in a chevy express? Does it...

anyone ever freed up a frozen blower befor,, any help will be apeciated,, thanks wheecln@cox.net

How offten should I Lubricate the vac side of my blower? I usally use WD 40 every few weeks.

My truckmount is dumping water from the SS water box to the waste tank all the time there is a valve on the bottom of the box the sticker is torn...

Hi i have a hurricane TM w 20 hp kohler and 4005 tuthill blower the blower drive shaft or drive rotor broke of (the piece that holds the pulley)...

OK started it up with the choke on and it ran fine Switched it off then tried starting it again 2 mins later and it wont start the starter just...

Floorguy_724 started a thread about adding a an APO or using a bigger waste tank. My question is this; do bigger waste tanks make your vac...

Hi, I own a ACE 860 and today the temperature was only about 190 so i checked the waste tank and there is a water flow from the heat bypass to the...

I have nothing but problems with the chemical feeds on all my vans. Drives me and the techs crazy. Sometimes they work, sometimes they don't....

OK started it up with the choke on and it ran fine Switched it off then tried starting it again 2 mins later and it wont start the starter just...

Hi everyone long time no see I have my K vale plumed up to the inlet solution line and nothing on the out let And with the valve closed its...

I have a boxxer 421 and notice that oil is slowly leaking from the drive shaft. I was wondering is changing the lip seal difficult? and also is...

Two of my WM machines have the chemical injection systems working intermittently. Sometimes they pull and sometimes they don't. Then if I leave it in...

:AddEmoticons04233: Guys, I have a Steam Genie rebel 45 with a 2T propane Heater, it works great but sometimes the 2T have a little hard time to...

i buy 1 year ago with 120 hrs and now is only 300 hrs but when i have a medium job my water temp stay a 180 and i think maybe lowest before i don't...

OK Long story short.... Incompetent people in NY where I purchased my TM from couldn't find a problem if it bit them in the A**:mad:. I started...

I uploaded two picture of those propane tanks that I am about to buy, it is a really good deal, I need same help to see if these belly propane tank...

Allright guys hope someone can point me in the right direction pretty fast. For the past week my tm has been shutting off in the middle of every...

So today was maintenance day on my equipment. After checking with my bro-in-law who's been running Powermatics for years he advised me to use 30W...

My pressure line is pulsating. I assume that maybe there is air leaking in the pump? What could be causing it? Thanks

The Lovejoy coupler insert on my Powermatic is cracked and needs replacement. It is an S-Flex size 8 one piece insert. In finding a replacement I...

haven had any problems since i put a lot of money into it all the heat i want now but. today was the killer i have notice lately that 2 or 3 times...

I have a couple of questions about the Vacuum on Blazer Plus TM: First; Today i noticed that my vac gauge was not zero when the unit was off. Is...

1000 PSI off a boxxer but a pump is a pump. Seals are gone and I have the head off but am unsure how to remove the brass retainer rings. I was...

I replaced the battery yesterday for the Prochem Blazer plus I have. The old battery died and I had to keep recharging it. Today the new one is dead....

Today while I was cleaning some upholstery, I asked my son to turn down the pressure. He did and did not stop and unscrewed the regulator. Luckily...

looked at a white magic 98 model today. It has a pin hole in the heat exchanger. We had to prime it to get the pressure up. Could this be because the...

I mean you really can't see the oil levels especially in a dim lit van. Add to it the fact that once it gets some age it dulls beyond usefulness. So...

There is a 90 elbow that screws into the heat exchange and screws into the stainless steel braided hose that goes off to the pressure gage on the...

I now own a used Boxxer 421 and it came with NO manual. :eek: I downloaded one from Hydromaster but it lacks any real meat. I have had engines...